California · Gunite & Concrete Pool Builders · Updated 2026

Gunite Pool Builders in Hanford

Compare 2 gunite pool builders serving Hanford for concrete pool construction. Ratings, review counts, contact details and 2026 planning prices for shells, spas and finishes are below.

Directory area: in Hanford, CA Rankings are calculated separately for each directory; a company may appear in several.
2 Gunite pool builders
3.8/5 Average customer rating
34 Customer reviews

Top 2 Gunite pool builders in Hanford, CA

Ordered by customer rating and review count across the Hanford area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.

Aqua Pool and Spa – pool company in Fresno, CA

Unclaimed Gunite / shotcrete pool builder
3.8 (19 reviews)
Pool Builder
Fresno, CA (559) 348-3936
New Creation Pools – pool company in Visalia, CA

Unclaimed Gunite / shotcrete pool builder
3.7 (15 reviews)
Pool Builder
Visalia, CA (559) 308-6045

Planning a new pool as well? The Hanford pool builders directory ranks all 22 builders in the area.

Hanford Gunite & concrete Prices · 2026

What a Gunite Pool Costs in Hanford

A mid-size gunite pool (about 16×32) with a standard plaster finish in Hanford typically runs $97,500–$156,000. Spas, premium finishes, features and decking are where custom pools climb from there:

JobTypical Hanford price
Small gunite pool (about 12×24), plaster finish$71,500–$104,000
Mid-size gunite pool (about 16×32)$97,500–$156,000
Large or elaborate custom pool$156,000–$325,000+
Attached gunite spa with spillover$19,500–$45,500
Pebble or quartz finish upgrade$6,500–$15,500
Tanning ledge or beach entry$4,000–$10,500
Water features, lighting, fire bowls$2,500–$19,500
Decking and coping$10,500–$32,500
Rock or hard-dig excavation allowance$4,000–$19,500
Permits, engineering, soils report$1,000–$5,200

California pricing is above the national baseline used for these estimates, mainly on labor and permitting. Gunite bids vary more than any other pool type because every element is custom — compare the shell thickness, steel schedule, finish, feature and equipment lines, not just the bottom number.

Custom gunite swimming pool and spa built in Hanford
A mid-size gunite pool in Hanford runs about $97,500–$156,000; an attached spa adds $19,500–$45,500.
Hiring · Gunite Pool Builders

What a gunite pool bid should itemize

  • Engineering and the shell. Soils report if required, rebar size and spacing, gunite or shotcrete thickness (floor and walls) and the bond beam.
  • Finish, tile and coping. Plaster, quartz, pebble or glass bead, waterline tile, step trim and the coping material, each with its warranty.
  • Plumbing and equipment. Pipe sizing, returns and drains, pump, filter, sanitizer, heater, lights and automation by model.
  • Features. Spa, tanning ledge, benches, water and fire features, with the extra plumbing and gas lines they need.
  • Deck, drainage, permits and startup. Square footage and material, deck drains, permits and inspections, and the 28-day plaster startup.

Questions to ask a gunite pool builder

  1. Do you shoot gunite or shotcrete, how thick, and who is the shell subcontractor?
  2. Is the steel and shell engineered for my soil, and is a soils report included?
  3. Which finishes do you install, and who holds the finish warranty — you or the applicator?
  4. What does a rock or groundwater surprise cost, and how is it documented?
  5. How many gunite pools did you complete last year, and can I visit two that are five or more years old?
Luxury concrete pool with a raised spa and water features in Hanford
Features shot into the shell cost far less than features added after the fact.

Design the features into the shell

Spas, ledges, benches, lighting niches and water features are cheapest when they are shot into the shell — adding them later means cutting concrete.

Hanford Gunite Pool Builders Snapshot

Highest Customer Rating

Aqua Pool and Spa

3.8 stars from 19 reviews

View Company →

Most Reviewed

Aqua Pool and Spa

19 reviews, 3.8 star average

View Company →

Directory Totals

Hanford market

3.8 average customer rating · 34 reviews · 2 companies

See All on the Map →

Gunite & Concrete Pool Construction in Hanford

2 gunite pool builders serving Hanford. The ranked companies average 3.8 stars across 34 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.

Terrain drives engineering: hillside lots need soils reports, caissons, or retaining structures, and every shell is built to seismic-conscious standards. Expansive soils show up across the state, so structural engineering isn't the place to save money. Title 24 energy rules mean variable-speed pumps are the standard spec, not an upgrade. Infinity edges on view lots, pebble interiors, baja shelves, and increasingly small, deliberate pools — plunge pools, cocktail pools, and spools that fit tight lots and tighter water budgets. Automation and solar heating adoption lead the nation.

For statewide rankings, city counts and California prices, see the California gunite pool builders directory, or check the nearby cities below.

Why Hanford homeowners choose gunite

  • Any design — freeform or geometric, any depth, vanishing edges, grottos, swim-up bars and integrated spas.
  • Durability — a steel-reinforced concrete shell built to last decades; the finish is renewable every 10 to 20 years.
  • Resale and features — the standard for luxury backyards, raised spas, beach entries and large pools beyond fiberglass sizes.
  • Trade-offs — the longest build (two to four months), a more porous finish that needs careful chemistry, and resurfacing costs down the road.

Vetting a concrete pool builder in Hanford

Ask for the shell engineering and the gunite crew's track record, read the structural, finish and equipment warranties separately, and compare at least three itemized bids for the same design. Pool builders need a CSLB C-53 swimming pool contractor license — verify it (and the bond) on the state's site in about a minute. California also requires new and remodeled pools to include two of seven approved drowning-prevention safety features, and many water districts add rules on filling and draining during drought years.

Hanford Gunite Pool Builders Questions

How much does a gunite pool cost in Hanford?

A mid-size gunite pool with a plaster finish in Hanford, CA typically runs $97,500–$156,000; small pools run $71,500–$104,000 and large custom designs $156,000–$325,000+. An attached spa adds $19,500–$45,500, a pebble or quartz finish $6,500–$15,500, and decking $10,500–$32,500. California pricing is above the national baseline used for these estimates, mainly on labor and permitting.

What is the difference between gunite and shotcrete?

Both are concrete sprayed over a steel cage. Gunite is a dry mix with water added at the nozzle; shotcrete is wet-mixed concrete pumped through the hose. Each produces a strong shell when applied by a good crew — the nozzleman's skill, the mix design and proper curing matter more than which method is used. Ask which your builder uses and what thickness is specified.

How long does it take to build a gunite pool in Hanford?

Plan on eight to sixteen weeks from excavation to swimming: dig and steel in the first week or two, the shell shot and cured for about four weeks, then tile, coping, plumbing, equipment, decking and finally the plaster and fill. Permits add two to eight weeks before the dig. Builders here work year-round; weather delays are mostly rain.

How long does a gunite pool last?

The concrete shell can last 50 years or more. The plaster finish lasts about 10 to 15 years (quartz and pebble 15 to 20 or more), waterline tile and coping 15 to 25 years, and equipment 8 to 15 years. Balanced water, especially calcium hardness and pH, is what protects the finish.

How long is the pool season in Hanford?

The prime outdoor season in Hanford runs May through October along the coast, longer inland — roughly 6 months of comfortable unheated swimming — and pools stay open and running year-round rather than being winterized. The coast swims May through October (heaters stretch it), while the Central Valley and desert run hot enough for six-plus unassisted months. Pools stay open all year, winter is mild, and evaporation — not freeze — is the seasonal enemy, especially inland.

Which Hanford gunite pool builder has the highest customer rating?

Aqua Pool and Spa has the highest customer rating on this Hanford list at 3.8 stars across 19 reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.

Is gunite more expensive than fiberglass?

Usually, for the same size: the shell is built on site, the finish is a separate trade, and custom features add up. The gap narrows for large pools and designs with spas and ledges, where fiberglass models are limited. Over 20 years a gunite pool also needs at least one resurfacing, which is part of its true cost.

Do gunite pool builders in California need to be licensed?

Pool builders need a CSLB C-53 swimming pool contractor license — verify it (and the bond) on the state's site in about a minute. California also requires new and remodeled pools to include two of seven approved drowning-prevention safety features, and many water districts add rules on filling and draining during drought years.

Map of Gunite pool builders Near Hanford

Build Gunite Pools in Hanford?

Claim your free PoolPad listing, check gunite among the pool types you build, and show Hanford homeowners planning a custom pool what you construct.