Pool Remodeling by City
Browse 4,031 companies that resurface, retile and renovate pools across 664 US cities. Compare customer ratings, review counts and 2026 local prices for replastering, pebble finishes, tile, coping and full remodels. Every company here is also ranked in the pool builders directory; this list narrows it to remodeling.
No matching city yet — try a nearby city, a ZIP code, or browse by state.
These city lists are ordered by customer rating and review count. If your city is not shown, browse by state for all 664 city directories.
Each state guide includes a statewide shortlist, local 2026 prices and every city list in the state.
Planning ranges for a standard white-plaster replaster and a pebble or quartz upgrade. Tile, coping and deck work stack on top.
| State | Replaster | Pebble / quartz | Companies |
|---|---|---|---|
| California | $6,500–$13,000 | $10,500–$23,500 | 700 pros → |
| Texas | $5,000–$10,000 | $8,000–$18,000 | 443 pros → |
| Florida | $5,000–$9,500 | $7,500–$17,000 | 370 pros → |
| Illinois | $5,500–$11,000 | $9,000–$20,000 | 128 pros → |
| North Carolina | $5,000–$9,500 | $7,500–$17,000 | 126 pros → |
| Ohio | $5,000–$10,000 | $8,000–$18,000 | 123 pros → |
| Tennessee | $5,000–$9,500 | $7,500–$17,000 | 119 pros → |
| Massachusetts | $6,500–$12,500 | $10,000–$22,500 | 114 pros → |
| Arizona | $5,000–$9,500 | $7,500–$17,000 | 107 pros → |
| New Jersey | $6,500–$12,500 | $10,000–$22,500 | 106 pros → |
| New York | $6,500–$13,000 | $10,500–$23,500 | 95 pros → |
| Alabama | $4,500–$9,000 | $7,000–$16,000 | 86 pros → |
| South Carolina | $5,000–$9,500 | $7,500–$17,000 | 85 pros → |
| Michigan | $5,500–$10,500 | $8,500–$19,000 | 83 pros → |
| Virginia | $5,500–$10,500 | $8,500–$19,000 | 78 pros → |
the United States pricing is close to the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where the United States requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Narrow the options to your city, then confirm the scope and the price before anyone comes out.
Companies are ordered by a weighted mix of customer rating and review count; specialists for this work are listed ahead of the companies that routinely handle it.
Review rating, review count and contact details, then ask the questions above so every quote covers the same job.
Share the pool size, equipment and current condition so each company prices the same scope, and compare at least two.
A standard white plaster replaster in your area, the United States typically runs $5,000–$10,000; quartz and pebble finishes run $8,000–$18,000. Waterline tile adds $2,500–$8,000 and new coping $3,000–$9,000. A full remodel that also updates the deck and equipment runs $15,000–$60,000+. the United States pricing is close to the national baseline used for these estimates; get itemized bids from at least three companies for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
Licensing rules vary by state and city. Confirm any required contractor license, general liability and workers' compensation certificates, and ask whether a permit is needed for the electrical or plumbing portions of the job.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Claim the listing for your company — or add your business if it isn’t listed yet — check every service you offer, and show pool owners in your area the work you handle. Listings are free.
