Plunge & Small Pools by City
Browse 823 companies that build plunge pools, cocktail pools and spools across 606 US cities. Compare customer ratings, review counts and 2026 installed prices for small-yard pools. Every company here is also ranked in the pool builders directory; this list narrows it to plunge & small pools.
No matching city yet — try a nearby city, a ZIP code, or browse by state.
These city lists are ordered by customer rating and review count. If your city is not shown, browse by state for all 606 city directories.
Each state guide includes a statewide shortlist, local 2026 prices and every city list in the state.
Planning ranges for a fiberglass plunge pool installed and for a custom gunite plunge or spool.
| State | Fiberglass plunge | Gunite plunge / spool | Companies |
|---|---|---|---|
| Texas | $35,000–$60,000 | $50,000–$90,000 | 71 pros → |
| California | $45,500–$78,000 | $65,000–$117,000 | 67 pros → |
| North Carolina | $33,500–$57,000 | $47,500–$85,500 | 43 pros → |
| Illinois | $38,500–$66,000 | $55,000–$99,000 | 40 pros → |
| Florida | $33,500–$57,000 | $47,500–$85,500 | 39 pros → |
| Ohio | $35,000–$60,000 | $50,000–$90,000 | 38 pros → |
| Tennessee | $33,500–$57,000 | $47,500–$85,500 | 34 pros → |
| South Carolina | $33,500–$57,000 | $47,500–$85,500 | 29 pros → |
| New Jersey | $44,000–$75,000 | $62,500–$112,500 | 28 pros → |
| New York | $45,500–$78,000 | $65,000–$117,000 | 27 pros → |
| Alabama | $31,500–$54,000 | $45,000–$81,000 | 26 pros → |
| Missouri | $33,500–$57,000 | $47,500–$85,500 | 26 pros → |
| Indiana | $35,000–$60,000 | $50,000–$90,000 | 24 pros → |
| Arizona | $33,500–$57,000 | $47,500–$85,500 | 21 pros → |
| Massachusetts | $44,000–$75,000 | $62,500–$112,500 | 21 pros → |
the United States pricing is close to the national baseline used for these estimates. A plunge pool is not half the price of a full pool — the pump, filter, heater, electrical and permits are the same — but it fits where nothing else will and costs far less to heat and maintain.
Measure the access route first — a crane over the house changes the budget. Decide on heat, jets and a bench up front, since they drive the equipment. Then compare a fiberglass model against a custom gunite price for the same footprint.
A heater on a 4,000-gallon pool costs little to run — it is the difference between a plunge pool used eight months a year and one used eight weeks.
Narrow the options to your city, then confirm the scope and the price before anyone comes out.
Companies are ordered by a weighted mix of customer rating and review count; specialists for this work are listed ahead of the companies that routinely handle it.
Review rating, review count and contact details, then ask the questions above so every quote covers the same job.
Share the pool size, equipment and current condition so each company prices the same scope, and compare at least two.
Installed in your area, the United States, a fiberglass plunge pool typically runs $35,000–$60,000, a precast concrete plunge $30,000–$55,000 and a custom gunite plunge $50,000–$90,000. A spool with jets and a heater runs $60,000–$110,000. Decking adds $4,000–$12,000 and a heater $3,000–$8,000. the United States pricing is close to the national baseline used for these estimates.
Most are 7 to 10 feet wide, 12 to 20 feet long and 4 to 6 feet deep with a flat floor — about 2,000 to 6,000 gallons versus 15,000 to 25,000 for a typical family pool. Cocktail pools add benches and a tanning shelf; spools are often 8×14 to 10×20 with spa jets.
You can cool off, float, soak and exercise in place; laps need a swim-jet or resistance-current system, which many plunge and spool builders install. For actual lap swimming a narrow lap pool of 30 feet or more is the better fit.
Much cheaper: a third or less of the water means a smaller pump, far less chemical use and a heater that brings the pool to temperature in an hour or two. Many owners here keep a plunge pool heated through the shoulder seasons and close it only in deep winter.
In most cities yes — any pool more than 18 to 24 inches deep needs a permit, electrical inspection and a barrier, regardless of footprint. Setbacks from property lines and the house decide where a small pool can go.
A fiberglass or precast plunge pool is often swimmable one to three weeks after excavation; a custom gunite plunge takes six to ten weeks because the shell has to cure before the finish. Permits add time up front, and the deck follows the pool.
Claim the listing for your company — or add your business if it isn’t listed yet — check every service you offer, and show pool owners in your area the work you handle. Listings are free.
