Massachusetts · Plunge & Small Pool Builders · Updated 2026
A real pool in a small yard: 6 plunge pool builders serving Beverly, ranked by rating and review count, with what a plunge or cocktail pool costs installed in Beverly this year.
Ordered by customer rating and review count across the Beverly area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Companies in the second group install fiberglass pools; most manufacturers offer plunge and cocktail shells — ask which small models they carry and whether they build custom gunite plunges too.
Planning a new pool as well? The Beverly pool builders directory ranks all 9 builders in the area.
Installed in Beverly, a fiberglass plunge pool typically runs $44,000–$75,000 and a custom gunite plunge or spool $62,500–$112,500 — the small footprint saves on excavation and finish, but the equipment pad costs about the same as a full-size pool:
| Job | Typical Beverly price |
|---|---|
| Precast concrete plunge pool, installed | $37,500–$69,000 |
| Fiberglass plunge pool, installed | $44,000–$75,000 |
| Custom gunite plunge pool | $62,500–$112,500 |
| Spool (spa + pool) with jets and heater | $75,000–$137,500 |
| Heater (year-round use) | $3,800–$10,000 |
| Chiller (cold plunge) | $5,000–$11,300 |
| Swim jets or resistance current | $6,500–$15,000 |
| Decking and coping | $5,000–$15,000 |
| Permits and inspections | $600–$3,800 |
Massachusetts pricing is above the national baseline used for these estimates, mainly on labor and permitting. A plunge pool is not half the price of a full pool — the pump, filter, heater, electrical and permits are the same — but it fits where nothing else will and costs far less to heat and maintain.
A heater on a 4,000-gallon pool costs little to run — it is the difference between a plunge pool used eight months a year and one used eight weeks.
Beverly market
4 average customer rating · 343 reviews · 6 companies · 3 specialists
See All on the Map →6 plunge pool builders serving Beverly. 3 are listed as specialists for this work; the rest are fiberglass pool installers that routinely handle it. The ranked companies average 4 stars across 343 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Gunite leads the western suburbs and the Cape's high end; vinyl liner carries the value market. Automatic covers, heat pumps, and salt systems are mainstream, and fiberglass keeps growing for its fast install inside a short build season. Smaller lots and higher construction costs have made plunge pools, cocktail pools and spools the fastest-growing pool type — a heated 8×16 pool costs a fraction to run and fits a courtyard.
For statewide rankings, city counts and Massachusetts prices, see the Massachusetts plunge pool builders directory, or check the nearby cities below.
Measure the access route first — a crane over the house changes the budget. Decide on heat, jets and a bench up front, since they drive the equipment. Then compare a fiberglass model against a custom gunite price for the same footprint. Massachusetts licenses Construction Supervisors and registers Home Improvement Contractors — verify both where they apply, plus insurance. Pool permits run through your town with strictly enforced barrier requirements (fencing, self-latching gates, alarms where applicable), and inspectors here genuinely check. Wetlands commissions add review on plenty of lots.
Installed in Beverly, MA, a fiberglass plunge pool typically runs $44,000–$75,000, a precast concrete plunge $37,500–$69,000 and a custom gunite plunge $62,500–$112,500. A spool with jets and a heater runs $75,000–$137,500. Decking adds $5,000–$15,000 and a heater $3,800–$10,000. Massachusetts pricing is above the national baseline used for these estimates, mainly on labor and permitting.
Most are 7 to 10 feet wide, 12 to 20 feet long and 4 to 6 feet deep with a flat floor — about 2,000 to 6,000 gallons versus 15,000 to 25,000 for a typical family pool. Cocktail pools add benches and a tanning shelf; spools are often 8×14 to 10×20 with spa jets.
You can cool off, float, soak and exercise in place; laps need a swim-jet or resistance-current system, which many plunge and spool builders install. For actual lap swimming a narrow lap pool of 30 feet or more is the better fit.
Much cheaper: a third or less of the water means a smaller pump, far less chemical use and a heater that brings the pool to temperature in an hour or two. Many owners here keep a plunge pool heated through the shoulder seasons and close it only in deep winter.
The outdoor season in Beverly runs June through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. June to mid-September is the typical unheated window, and heaters are common. Winters are long, snowy, and freezing, so a thorough close and snow-rated safety cover are baseline equipment.
Affordable Pool Inc. has the highest customer rating on this Beverly list at 5 stars across 1 reviews. Advanced Spa And Pool (ASAP) has the largest review count (246 reviews at 4.6 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
In most cities yes — any pool more than 18 to 24 inches deep needs a permit, electrical inspection and a barrier, regardless of footprint. Setbacks from property lines and the house decide where a small pool can go. Massachusetts licenses Construction Supervisors and registers Home Improvement Contractors — verify both where they apply, plus insurance. Pool permits run through your town with strictly enforced barrier requirements (fencing, self-latching gates, alarms where applicable), and inspectors here genuinely check. Wetlands commissions add review on plenty of lots.
A fiberglass or precast plunge pool is often swimmable one to three weeks after excavation; a custom gunite plunge takes six to ten weeks because the shell has to cure before the finish. Permits add time up front, and the deck follows the pool.
Check plunge pool builders in cities near Beverly, or open the Massachusetts directory for every listed market in the state.
Claim your free PoolPad listing, check plunge and small pools among the pool types you build, and show Beverly homeowners with a small yard what fits.
