Home Pool Deck Contractors New Mexico

New Mexico · Pool Deck & Patio Contractors · Updated 2026

Pool Deck Contractors in New Mexico

Compare 1 pool deck and patio contractors across New Mexico for decking, patios and the rest of the yard around the pool. Ratings, review counts, contact details and 2026 planning prices are below. City lists cover 2 New Mexico markets.

Directory area: in New Mexico Rankings are calculated separately for each directory; a company may appear in several.
1 Deck & patio contractors
2 City directories
4.6/5 Shortlist avg customer rating
5 mo Swim season

1 Ranked Deck & patio contractors Across New Mexico

The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.

4.6 (9 reviews)
Pool Repair
Albuquerque, NM 3+ years in business (505) 450-1816

Pool Deck Contractors by City in New Mexico

Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.

New Mexico Decks & patios Prices · 2026

What a Pool Deck Costs in New Mexico

Resurfacing an existing concrete deck with an overlay or coating in New Mexico typically runs $4,000–$11,500; a new deck depends on the material and the square footage:

JobTypical New Mexico price
Deck resurfacing (overlay, spray texture, coating)$4,000–$11,500
New broom-finish or stamped concrete$5,700–$14,300 for 600 sq ft
Concrete pavers$11–$24 / sq ft
Travertine or natural stone$14–$30 / sq ft
Crack, lift and drainage repair$500–$2,400
Sealing an existing deck$300–$875
Pergola or shade structure$3,000–$11,500
Outdoor kitchen$7,500–$28,500+

New Mexico pricing is close to the national baseline used for these estimates. Demolition of the old deck, grading and drainage, the coping tie-in and access for equipment are the line items that move a quote; a deck that slopes toward the pool or holds water needs the drainage fixed before any surface goes on.

Pool deck and patio built by a contractor in New Mexico
Resurfacing a deck in New Mexico runs about $4,000–$11,500; new pavers $11–$24 / sq ft.
Hiring · Pool Deck Contractors

What a deck quote should itemize

  • Demolition and disposal — whether the old surface is removed or overlaid, and where the debris goes.
  • Base and drainage — compacted base, slope away from the pool (about ¼ inch per foot), deck drains and the expansion joint at the coping.
  • Surface material and finish — concrete mix and finish, paver or stone type, sealer, and slip resistance for wet feet.
  • Coping tie-in — how the new deck meets the coping and whether the mastic joint is replaced.
  • Utilities and extras — lighting conduit, gas lines for a kitchen or fire feature, footings for shade structures.

Questions to ask a pool deck contractor

  1. How do you handle drainage, and what slope will the finished deck have away from the pool?
  2. Will you replace the expansion joint and mastic where the deck meets the coping?
  3. Which surfaces stay cool and slip-resistant in our climate, and can I see samples wet?
  4. Do you pull the permit for electrical or gas runs to a kitchen, lights or a fire feature?
  5. How long before we can walk on it, set furniture on it and fill any planters?
Covered patio and outdoor living area beside a pool in New Mexico
Shade, lighting and kitchen utilities cost least while the deck is open.

Run the utilities now

Conduit for lighting, a gas stub for a kitchen or fire feature and footings for shade cost little while the deck is open and a lot afterwards.

Pool Deck & Patio Contractors in New Mexico

PoolPad tracks 1 pool deck and patio contractors across New Mexico, with city lists for 2 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.

Expect caliche and cemented desert soils in the dig, and factor wind exposure into cover and equipment planning. Altitude matters in equipment sizing — heaters especially need correct high-elevation specs — and drainage design around monsoon bursts protects decks and equipment pads. Southwestern builds skew clean and geometric: stucco-walled backyards, bright plaster or pebble interiors, and shade structures that make 95° afternoons usable. Smaller pools and spools fit both the lots and the shorter season.

The largest listed markets are Albuquerque (1 company), Rio Rancho (1 company).

Popular pool deck options in New Mexico

  • Resurfacing overlays — spray-texture or stamped overlays over sound concrete; the fastest way to fix a hot, slick or stained deck.
  • Poured concrete — broom finish, stamped or exposed aggregate; the budget baseline for new decks and extensions.
  • Pavers — concrete or porcelain pavers on a compacted base; individual pieces lift for repairs and drainage.
  • Travertine and natural stone — cool underfoot and slip-resistant when honed; the premium finish around most high-end pools.
  • Outdoor living — kitchens, fire features, pergolas and lighting that share the deck's utilities and footings.

Vetting a New Mexico deck contractor

Look at decks the contractor finished several years ago, not just new ones — settling, heaving and joint failure take a few seasons to show. Confirm licensing where New Mexico requires it and insurance, and get drainage, base preparation and the coping joint spelled out in the contract. New Mexico licenses contractors through the state (look for an active license you can verify with the Regulation & Licensing Department), and municipalities handle pool permits and barrier enforcement locally. Fencing with self-latching gates is the norm; confirm your city's specifics before the design is final.

New Mexico Pool Deck Contractors Questions

How much does a pool deck cost in New Mexico?

Resurfacing an existing concrete deck in New Mexico, NM typically runs $4,000–$11,500. New concrete runs $5,700–$14,300 for 600 sq ft, pavers $11–$24 / sq ft and travertine $14–$30 / sq ft installed. Crack and drainage repairs run $500–$2,400 and sealing $300–$875. New Mexico pricing is close to the national baseline used for these estimates; demolition, grading and the coping tie-in move the number most, so compare itemized bids for the same square footage.

Can I resurface my pool deck instead of replacing it?

Yes, if the slab is structurally sound: no major heaving, wide moving cracks or drainage toward the pool. Spray-texture and stamped overlays bond to the old concrete and add a cooler, slip-resistant surface for a fraction of a new deck. A slab that pumps water toward the pool, has sunk at the coping or is badly cracked should be removed and rebuilt with proper base and drainage.

What pool deck material stays coolest?

Light-colored travertine and honed natural stone stay the coolest, followed by light concrete pavers and textured overlays with a light acrylic coating; dark stone, dark pavers and plain broom-finish concrete get the hottest. In sunny climates ask to stand on wet samples on a hot afternoon before choosing.

How long does a new pool deck take?

Resurfacing an existing deck usually takes two to five days including prep and cure; a new poured-concrete deck one to two weeks with forming, pour, cure and sealing; pavers and travertine one to three weeks depending on the base work and cutting around the coping. Add time for kitchens, shade structures and any permit inspections.

How long is the pool season in New Mexico?

The outdoor season in New Mexico runs May through September — about 5 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. High-desert sun is the story: intense UV at 5,000+ feet burns through chlorine and fades interiors faster than sea-level owners expect. Albuquerque swims May through September; southern New Mexico stretches longer, while Santa Fe's altitude keeps the season short and nights cool.

Which New Mexico pool deck contractor has the highest customer rating?

Sunrise Pools Remodeling & Custom Concrete has the highest customer rating on this New Mexico list at 4.6 stars across 9 reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.

Do I need a permit for a pool deck in New Mexico?

Often for the parts that involve electrical, gas, structures or drainage changes — a kitchen, fire feature, pergola or a deck that changes grading — and always if the barrier or fence is affected. Concrete resurfacing rarely needs one. New Mexico licenses contractors through the state (look for an active license you can verify with the Regulation & Licensing Department), and municipalities handle pool permits and barrier enforcement locally. Fencing with self-latching gates is the norm; confirm your city's specifics before the design is final.

How do I keep a pool deck from cracking?

Control joints spaced correctly, a compacted base, proper slope and a maintained expansion joint at the coping do most of the work. Seal concrete every two to three years, keep sprinklers off the deck, and fix drainage that lets water under the slab — freeze-thaw and washed-out base are what lift and crack decks.

Build Pool Decks in New Mexico?

Claim your free PoolPad listing, check decks and outdoor living among your services, and show New Mexico homeowners planning the yard around their pool what you build.