New Mexico · Inground Pool Builders & Contractors · Updated 2026
Compare 28 inground pool builders across New Mexico for new inground pool construction. Ratings, review counts, contact details and 2026 planning prices by pool type are below. 11 are listed as specialists for this work; the rest are pool builders that routinely handle it. City lists cover 2 New Mexico markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Installed prices in New Mexico run from $43,000–$66,500 for a mid-size vinyl liner pool to $71,500–$114,000 for a comparable gunite pool, with fiberglass in between at $55,000–$81,000. Decking, fencing and permits stack on top:
| Job | Typical New Mexico price |
|---|---|
| Vinyl liner pool, installed (about 16×32) | $43,000–$66,500 |
| Fiberglass pool, installed (about 14×30) | $55,000–$81,000 |
| Gunite / concrete pool, installed (about 16×32) | $71,500–$114,000 |
| Attached spa or spillover | $11,500–$33,500 |
| Decking and coping around the pool | $5,500–$19,000 |
| Safety fence and gates | $1,900–$5,700 |
| Permits, engineering, utility locates | $500–$3,300 |
| Typical all-in project with deck and fence | $66,500–$142,500+ |
| Ongoing upkeep (chemicals, power, service) | $1,200–$2,900 / year |
New Mexico pricing is close to the national baseline used for these estimates. Soil, access for excavation equipment, slope, utility relocation and the finish and feature package move a quote more than the pool's footprint does — compare itemized bids for the same size and type.
Fiberglass, gunite and vinyl bids are not comparable to each other — settle the type (or ask each builder to bid two), then compare like for like.
PoolPad tracks 28 inground pool builders across New Mexico, with city lists for 2 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Expect caliche and cemented desert soils in the dig, and factor wind exposure into cover and equipment planning. Altitude matters in equipment sizing — heaters especially need correct high-elevation specs — and drainage design around monsoon bursts protects decks and equipment pads. Southwestern builds skew clean and geometric: stucco-walled backyards, bright plaster or pebble interiors, and shade structures that make 95° afternoons usable. Smaller pools and spools fit both the lots and the shorter season.
The largest listed markets are Albuquerque (19 companies), Rio Rancho (19 companies).
Get at least three itemized bids for the same type and size, visit finished pools that are a few years old, and read the warranty for the shell, the finish and the equipment separately. Ask how the company handles rock, groundwater and access problems once digging starts. New Mexico licenses contractors through the state (look for an active license you can verify with the Regulation & Licensing Department), and municipalities handle pool permits and barrier enforcement locally. Fencing with self-latching gates is the norm; confirm your city's specifics before the design is final.
Installed in New Mexico, NM, a mid-size vinyl liner pool typically runs $43,000–$66,500, a fiberglass pool $55,000–$81,000 and a gunite pool $71,500–$114,000. With decking, a fence and permits most complete projects land at $66,500–$142,500+. New Mexico pricing is close to the national baseline used for these estimates; the size, finish, features and site conditions move the number most.
There is no single best type. Fiberglass installs fastest and is the easiest to maintain but comes in fixed shapes; gunite can be any shape with any feature but costs more to build and to resurface later; vinyl liner has the lowest upfront price but needs a new liner every eight to twelve years. Match the type to your budget, your yard, how long you plan to stay and how much maintenance you want.
A fiberglass pool is often swimmable two to six weeks after excavation; a vinyl liner pool four to eight weeks; a gunite pool eight to sixteen weeks because the shell has to cure before tile, coping and the finish go on. Permitting adds two to eight weeks up front, and decking and landscaping follow the pool. Most crews dig in the off-season so the pool is ready when the season opens.
Most residential pools are 3 to 6 feet with a deep end of 6 to 8 feet; diving depths of 8 feet or more need a longer pool and a larger excavation. Fiberglass shells are limited to the manufacturer's molds (commonly 6 to 8 feet), while gunite and vinyl liner pools can be built to almost any profile, including sport pools that are shallow at both ends.
The outdoor season in New Mexico runs May through September — about 5 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. High-desert sun is the story: intense UV at 5,000+ feet burns through chlorine and fades interiors faster than sea-level owners expect. Albuquerque swims May through September; southern New Mexico stretches longer, while Santa Fe's altitude keeps the season short and nights cool.
Perspective On Pools Inc has the highest customer rating on this New Mexico list at 5 stars across 35 reviews. Bluewater Pools has the largest review count (153 reviews at 4 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
New Mexico licenses contractors through the state (look for an active license you can verify with the Regulation & Licensing Department), and municipalities handle pool permits and barrier enforcement locally. Fencing with self-latching gates is the norm; confirm your city's specifics before the design is final.
Budget $1,200–$2,900 / year for chemicals, electricity and routine service, more for a heated pool or a weekly cleaning route. Fiberglass and vinyl surfaces use fewer chemicals than plaster; a variable-speed pump and an automatic cover cut running costs the most.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check the pool types you build, and show New Mexico homeowners planning a new pool what you install.
