Alaska · Pool Remodeling & Resurfacing · Updated 2026
Resurfacing, tile and coping, or a complete makeover: 6 pool remodeling companies serving Anchorage. Ratings, review counts, contact details and 2026 planning prices are below.
Ordered by customer rating and review count across the Anchorage area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Anchorage pool builders directory ranks all 13 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Anchorage typically runs $6,500–$13,000, while pebble and quartz finishes run $10,500–$23,500. Everything else stacks on top of that:
| Job | Typical Anchorage price |
|---|---|
| Replaster (white plaster) | $6,500–$13,000 |
| Pebble or quartz finish | $10,500–$23,500 |
| Waterline tile | $3,300–$10,400 |
| Coping replacement | $3,900–$11,700 |
| Deck resurfacing | $5,000–$15,500 |
| Equipment upgrade (pump, filter, heater, automation) | $4,000–$13,000 |
| Add an attached spa | $19,500–$45,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $19,500–$78,000+ |
Alaska pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Anchorage market
1.5 average customer rating · 3 reviews · 6 companies
See All on the Map →6 pool remodeling companies serving Anchorage. The ranked companies average 1.5 stars across 3 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Frost engineering rules everything: deep insulation, heat-traced or drained plumbing, and structures designed for freeze cycles no Lower-48 pool ever sees. Material logistics and a short site season shape budgets as much as design does. Indoor pools, swim spas, and higher-end hot tub installations carry most of the market; outdoor pools are uncommon and typically compact, heated, automatically covered, and heavily insulated.
For statewide rankings, city counts and Alaska prices, see the Alaska pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Alaska requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Alaska licenses contractors at the state level with bonding and insurance — verify all three. Pool and mechanical permits run through your municipality (Anchorage's building department is the most structured), and energy-code details matter on indoor builds.
A standard white plaster replaster in Anchorage, AK typically runs $6,500–$13,000; quartz and pebble finishes run $10,500–$23,500. Waterline tile adds $3,300–$10,400 and new coping $3,900–$11,700. A full remodel that also updates the deck and equipment runs $19,500–$78,000+. Alaska pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Anchorage runs a short mid-June to mid-August window — about 2 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. The outdoor window is roughly mid-June to mid-August, and even then heaters do constant work. Most projects that pencil are indoor pools, endless-pool installs, or serious hot tub setups built for year-round use.
Anchorage Concrete has the highest customer rating on this Anchorage list at 5 stars across 1 reviews. Service Pool has the largest review count (2 reviews at 4 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Alaska licenses contractors at the state level with bonding and insurance — verify all three. Pool and mechanical permits run through your municipality (Anchorage's building department is the most structured), and energy-code details matter on indoor builds.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Anchorage, or open the Alaska directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Anchorage homeowners planning a renovation what you do.
