Washington · Pool Remodeling & Resurfacing · Updated 2026
Resurfacing, tile and coping, or a complete makeover: 16 pool remodeling companies serving Everett. Ratings, review counts, contact details and 2026 planning prices are below. 6 are listed as specialists for this work; the rest are pool builders that routinely handle it.
Ordered by customer rating and review count across the Everett area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Everett pool builders directory ranks all 121 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Everett typically runs $6,000–$12,000, while pebble and quartz finishes run $9,500–$21,500. Everything else stacks on top of that:
| Job | Typical Everett price |
|---|---|
| Replaster (white plaster) | $6,000–$12,000 |
| Pebble or quartz finish | $9,500–$21,500 |
| Waterline tile | $3,000–$9,600 |
| Coping replacement | $3,600–$10,800 |
| Deck resurfacing | $5,000–$14,500 |
| Equipment upgrade (pump, filter, heater, automation) | $3,500–$12,000 |
| Add an attached spa | $18,000–$42,000 |
| Full remodel (finish, tile, coping, deck, equipment) | $18,000–$72,000+ |
Washington pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Everett market
3.8 average customer rating · 359 reviews · 16 companies · 6 specialists
See All on the Map →16 pool remodeling companies serving Everett. 6 are listed as specialists for this work; the rest are pool builders that routinely handle it. The ranked companies average 3.8 stars across 359 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Westside builds manage rain: drainage design, winter dig logistics, and slope engineering on view lots are the recurring themes, with glacial till and the occasional boulder in the dig. Eastside soils dig easier but winters freeze harder — frost-depth plumbing statewide. Fiberglass and vinyl lead for install speed under rain-window scheduling; gunite serves the view-lot high end. Heat pumps, automatic covers, and integrated hot tubs are the regional standard kit.
For statewide rankings, city counts and Washington prices, see the Washington pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Washington requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Washington requires contractor registration with bonding and insurance — verify both on the state's site in a minute. Pool permits and residential-code barrier requirements run through your city or county, and critical-area rules (slopes, streams, wetlands) add review on plenty of Puget Sound lots.
A standard white plaster replaster in Everett, WA typically runs $6,000–$12,000; quartz and pebble finishes run $9,500–$21,500. Waterline tile adds $3,000–$9,600 and new coping $3,600–$10,800. A full remodel that also updates the deck and equipment runs $18,000–$72,000+. Washington pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Everett runs mid-June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. West of the Cascades expect a mid-June-to-September window with mild, gray shoulders — heat pumps and solar covers are what make the investment rational. East of the mountains, summers hit 95°+ and the season stretches noticeably longer.
Cruz Construction & Renovation LLC has the highest customer rating on this Everett list at 5 stars across 33 reviews. KrisCo Aquatech Pools & Spas has the largest review count (139 reviews at 4.7 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Washington requires contractor registration with bonding and insurance — verify both on the state's site in a minute. Pool permits and residential-code barrier requirements run through your city or county, and critical-area rules (slopes, streams, wetlands) add review on plenty of Puget Sound lots.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Everett, or open the Washington directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Everett homeowners planning a renovation what you do.
