Wyoming · Pool Remodeling & Resurfacing · Updated 2026
10 pool remodeling companies serving Casper, ordered by customer rating and review count, with 2026 resurfacing and remodel price ranges so you can compare a replaster against a full renovation. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it.
Ordered by customer rating and review count across the Casper area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Casper pool builders directory ranks all 12 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Casper typically runs $5,500–$11,000, while pebble and quartz finishes run $9,000–$20,000. Everything else stacks on top of that:
| Job | Typical Casper price |
|---|---|
| Replaster (white plaster) | $5,500–$11,000 |
| Pebble or quartz finish | $9,000–$20,000 |
| Waterline tile | $2,800–$8,800 |
| Coping replacement | $3,300–$9,900 |
| Deck resurfacing | $4,500–$13,000 |
| Equipment upgrade (pump, filter, heater, automation) | $3,500–$11,000 |
| Add an attached spa | $16,500–$38,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $16,500–$66,000+ |
Wyoming pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Casper market
0.5 average customer rating · 89 reviews · 10 companies · 1 specialist
See All on the Map →10 pool remodeling companies serving Casper. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it. The ranked companies average 0.5 stars across 89 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Wind is the design constant: covers, fencing, and equipment placement all account for it. Rocky ground makes excavation language worth putting in writing, frost-depth plumbing is standard, and altitude affects heater sizing — spec accordingly. Fiberglass and vinyl liner fit the window; heated, auto-covered pools with wind-sheltered terraces are the smart local build. Integrated hot tubs do the year-round work.
For statewide rankings, city counts and Wyoming prices, see the Wyoming pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Wyoming requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Wyoming handles contractor licensing locally, so check insurance certificates, references, and recent projects. Pool permits and residential-code barrier requirements run through the city or county building department; Teton County design review adds steps on higher-end builds.
A standard white plaster replaster in Casper, WY typically runs $5,500–$11,000; quartz and pebble finishes run $9,000–$20,000. Waterline tile adds $2,800–$8,800 and new coping $3,300–$9,900. A full remodel that also updates the deck and equipment runs $16,500–$66,000+. Wyoming pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Casper runs mid-June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. Mid-June through early September, with high-altitude sun and cold nights — heaters are essential equipment. Winters are long, windy, and hard-freezing statewide.
Bull Horn Brewing has the highest customer rating on this Casper list at 4.7 stars across 89 reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Wyoming handles contractor licensing locally, so check insurance certificates, references, and recent projects. Pool permits and residential-code barrier requirements run through the city or county building department; Teton County design review adds steps on higher-end builds.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Casper, or open the Wyoming directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Casper homeowners planning a renovation what you do.
