Colorado · Pool Remodeling & Resurfacing · Updated 2026
Resurfacing, tile and coping, or a complete makeover: 27 pool remodeling companies in the Denver area. Ratings, review counts, contact details and 2026 planning prices are below. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it. This page shows the top 20.
Ordered by customer rating and review count across the Denver area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Denver pool builders directory ranks all 61 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Denver typically runs $6,000–$11,500, while pebble and quartz finishes run $9,000–$20,500. Everything else stacks on top of that:
| Job | Typical Denver price |
|---|---|
| Replaster (white plaster) | $6,000–$11,500 |
| Pebble or quartz finish | $9,000–$20,500 |
| Waterline tile | $2,900–$9,200 |
| Coping replacement | $3,400–$10,400 |
| Deck resurfacing | $4,500–$14,000 |
| Equipment upgrade (pump, filter, heater, automation) | $3,500–$11,500 |
| Add an attached spa | $17,500–$40,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $17,500–$69,000+ |
Colorado pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Denver market
4.3 average customer rating · 638 reviews · 27 companies · 1 specialist
See All on the Map →27 pool remodeling companies in the Denver area. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it. The ranked companies average 4.3 stars across 638 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Expansive bentonite clay is the Colorado headline: it swells dramatically with moisture, so soils reports, structural engineering, and sometimes pier systems aren't upsells — they're how shells survive. Freeze-thaw cycling drives deck and plumbing specs, and hail shapes equipment placement. Gunite with mountain-view terraces leads the high end; fiberglass grows fast for install speed. Heaters and automatic covers are standard, and integrated hot tubs earn their keep ten months a year.
For statewide rankings, city counts and Colorado prices, see the Colorado pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Colorado requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Colorado licenses contractors at the city and county level (Denver-metro jurisdictions each run their own programs) — verify local licensing and insurance, and confirm the electrician on the equipment permit. Pool permits and residential-code barrier requirements run through your municipality; HOA review is near-universal in newer developments.
A standard white plaster replaster in Denver, CO typically runs $6,000–$11,500; quartz and pebble finishes run $9,000–$20,500. Waterline tile adds $2,900–$9,200 and new coping $3,400–$10,400. A full remodel that also updates the deck and equipment runs $17,500–$69,000+. Colorado pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Denver runs late May through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. Late May through mid-September, with intense high-altitude UV and cool nights that make heaters standard. Sunny winter days tempt, but hard freezes rule — full winterization is the norm.
Denver West Pools has the highest customer rating on this Denver list at 5 stars across 12 reviews. Integrity Pool Builders has the largest review count (99 reviews at 4.9 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Colorado licenses contractors at the city and county level (Denver-metro jurisdictions each run their own programs) — verify local licensing and insurance, and confirm the electrician on the equipment permit. Pool permits and residential-code barrier requirements run through your municipality; HOA review is near-universal in newer developments.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Denver, or open the Colorado directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Denver homeowners planning a renovation what you do.
