Utah · Vinyl Liner Pool Builders & Installers · Updated 2026
Compare 4 vinyl liner pool builders serving Riverton for vinyl liner pool construction. Ratings, review counts, contact details and 2026 planning prices are below.
Ordered by customer rating and review count across the Riverton area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Planning a new pool as well? The Riverton pool builders directory ranks all 28 builders in the area.
A mid-size vinyl liner pool (about 16×32) installed in Riverton typically runs $49,500–$77,000 with standard equipment and a basic deck. The liner itself is replaced every eight to twelve years at $4,400–$7,700:
| Job | Typical Riverton price |
|---|---|
| Small vinyl liner pool (about 12×24), installed | $38,500–$55,000 |
| Mid-size pool (about 16×32), installed | $49,500–$77,000 |
| Large pool (about 20×40), installed | $71,500–$104,500+ |
| Polymer wall upgrade over steel | $2,200–$5,500 |
| Vinyl-covered steps, benches or sun ledge | $2,200–$6,600 |
| Decking and coping | $5,500–$16,500 |
| Equipment upgrades (heater, salt, automation) | $3,500–$10,000 |
| Safety cover | $2,200–$4,400 |
| Permits and inspections | $400–$2,800 |
| Liner replacement, later (every 8–12 years) | $4,400–$7,700 |
Utah pricing is above the national baseline used for these estimates, mainly on labor and permitting. Rectangles cost less than freeforms, steel walls less than polymer, and a thicker liner (27 or 28 mil) adds a little up front and years to the first replacement.
The second liner is part of the real cost of a vinyl pool — ask every bidder what a replacement will run and how long the first one should last.
Riverton market
4.6 average customer rating · 192 reviews · 4 companies
See All on the Map →4 vinyl liner pool builders serving Riverton. The ranked companies average 4.6 stars across 192 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Bench lots bring slope, rock, and view engineering into play; valley soils vary from clay to gravel and reward soils-aware builders. Altitude affects heater sizing up north, and St. George builds dig caliche and plan for 110° summers. Vinyl liner pools dominate freezing climates because the wall system tolerates frost heave better than a rigid finish and the liner is forgiving of winterization.
For statewide rankings, city counts and Utah prices, see the Utah vinyl liner pool builders directory, or check the nearby cities below.
Ask about the wall system, floor material and liner gauge, confirm the liner warranty in writing, and get a price for the first liner replacement now so you know the long-term cost. Compare at least three itemized bids for the same size and shape. Utah licenses contractors at the state level through DOPL — verify the license classification and insurance. Pool permits and residential-code barrier requirements (fencing, self-latching gates) run through your city, and HOA architectural review is common in newer developments.
A mid-size vinyl liner pool installed in Riverton, UT typically runs $49,500–$77,000; small pools run $38,500–$55,000 and large pools $71,500–$104,500+. Decking adds $5,500–$16,500 and a safety cover $2,200–$4,400. Budget $4,400–$7,700 for a liner replacement every eight to twelve years. Utah pricing is above the national baseline used for these estimates, mainly on labor and permitting.
Eight to twelve years is typical, longer with a thicker liner, balanced water and a cover. Fading, brittleness, wrinkles and leaks at seams or fittings are the signs it is time. Replacement is a one-to-three-day job once the new liner arrives, and the pool is otherwise unchanged.
Usually four to eight weeks after permits: a few days to dig and set the walls, a week or two for plumbing, the floor and the deck, then the liner is installed and the pool filled in a day. Custom liners are made to measure and can take two to four weeks to arrive. Liners install best in warm weather, so spring and summer book first.
The smooth surface uses fewer chemicals than plaster and never needs resurfacing, but the liner itself is the recurring cost — roughly the price of a resurfacing spread over a similar interval. Keep the water balanced, avoid letting the level drop, and use a cover to extend liner life.
The outdoor season in Riverton runs mid-May through September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. Mid-May through September along the Wasatch Front, with dry heat and cool nights; St. George runs closer to six-plus months of desert season. Northern winters freeze properly — full closes are standard — while the south winters light.
Liquid Luxury Pools has the highest customer rating on this Riverton list at 5 stars across 22 reviews. Hall's Pool & Spa Service has the largest review count (163 reviews at 4.5 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Both perform well. Galvanized steel panels are the lower-cost standard and very strong; polymer (plastic) panels cost more but cannot rust and suit salt systems, coastal air and wet soils. Either way, ask how the panels are braced and how the deck is tied to the walls so the coping does not shift.
Yes — walls are built on site, so the depth profile is yours to choose, including diving depths. Spas are usually added as a separate fiberglass or gunite unit beside the pool rather than inside the liner structure. Tanning ledges and benches are formed and then covered with the liner.
Check vinyl liner pool builders in cities near Riverton, or open the Utah directory for every listed market in the state.
Claim your free PoolPad listing, check vinyl liner among the pool types you build, and show Riverton homeowners what you install.
