Oklahoma · Vinyl Liner Pool Builders & Installers · Updated 2026
Compare 2 vinyl liner pool builders serving Tulsa for vinyl liner pool construction. Ratings, review counts, contact details and 2026 planning prices are below.
Ordered by customer rating and review count across the Tulsa area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Planning a new pool as well? The Tulsa pool builders directory ranks all 82 builders in the area.
A mid-size vinyl liner pool (about 16×32) installed in Tulsa typically runs $40,500–$63,000 with standard equipment and a basic deck. The liner itself is replaced every eight to twelve years at $3,600–$6,300:
| Job | Typical Tulsa price |
|---|---|
| Small vinyl liner pool (about 12×24), installed | $31,500–$45,000 |
| Mid-size pool (about 16×32), installed | $40,500–$63,000 |
| Large pool (about 20×40), installed | $58,500–$85,500+ |
| Polymer wall upgrade over steel | $1,800–$4,500 |
| Vinyl-covered steps, benches or sun ledge | $1,800–$5,400 |
| Decking and coping | $4,500–$13,500 |
| Equipment upgrades (heater, salt, automation) | $2,500–$8,000 |
| Safety cover | $1,800–$3,600 |
| Permits and inspections | $400–$2,300 |
| Liner replacement, later (every 8–12 years) | $3,600–$6,300 |
Oklahoma pricing is below the national baseline used for these estimates. Rectangles cost less than freeforms, steel walls less than polymer, and a thicker liner (27 or 28 mil) adds a little up front and years to the first replacement.
The second liner is part of the real cost of a vinyl pool — ask every bidder what a replacement will run and how long the first one should last.
Tulsa market
4.2 average customer rating · 356 reviews · 2 companies
See All on the Map →2 vinyl liner pool builders serving Tulsa. The ranked companies average 4.2 stars across 356 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Expansive red clay is the defining dig across much of the state: shells want conservative steel and good drainage, and decks want proper sub-base prep to ride the shrink-swell. Wind exposure shapes cover, fence, and landscaping choices more than most states. Vinyl liner pools are the budget route to a permanent inground pool; the trade-off is the liner itself, which is replaced about once a decade.
For statewide rankings, city counts and Oklahoma prices, see the Oklahoma vinyl liner pool builders directory, or check the nearby cities below.
Ask about the wall system, floor material and liner gauge, confirm the liner warranty in writing, and get a price for the first liner replacement now so you know the long-term cost. Compare at least three itemized bids for the same size and shape. Oklahoma handles most pool permitting at the city level — OKC, Tulsa, and their suburbs each enforce their own permit and barrier/fence requirements, generally following the residential codes. Verify your builder's insurance certificates and confirm a licensed electrician handles the equipment hookup and bonding.
A mid-size vinyl liner pool installed in Tulsa, OK typically runs $40,500–$63,000; small pools run $31,500–$45,000 and large pools $58,500–$85,500+. Decking adds $4,500–$13,500 and a safety cover $1,800–$3,600. Budget $3,600–$6,300 for a liner replacement every eight to twelve years. Oklahoma pricing is below the national baseline used for these estimates.
Eight to twelve years is typical, longer with a thicker liner, balanced water and a cover. Fading, brittleness, wrinkles and leaks at seams or fittings are the signs it is time. Replacement is a one-to-three-day job once the new liner arrives, and the pool is otherwise unchanged.
Usually four to eight weeks after permits: a few days to dig and set the walls, a week or two for plumbing, the floor and the deck, then the liner is installed and the pool filled in a day. Custom liners are made to measure and can take two to four weeks to arrive. Liners install best in warm weather, so spring and summer book first.
The smooth surface uses fewer chemicals than plaster and never needs resurfacing, but the liner itself is the recurring cost — roughly the price of a resurfacing spread over a similar interval. Keep the water balanced, avoid letting the level drop, and use a cover to extend liner life.
The outdoor season in Tulsa runs May through September — about 6 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. The season runs May through September with hot, windy summers that increase evaporation. Spring storms bring wind and hail, and winter temperatures lead most owners to use at least a partial close.
Custom Swimming Pool Services has the highest customer rating on this Tulsa list at 4.7 stars across 47 reviews. Dolphin Pools & Spas has the largest review count (309 reviews at 3.7 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Both perform well. Galvanized steel panels are the lower-cost standard and very strong; polymer (plastic) panels cost more but cannot rust and suit salt systems, coastal air and wet soils. Either way, ask how the panels are braced and how the deck is tied to the walls so the coping does not shift.
Yes — walls are built on site, so the depth profile is yours to choose, including diving depths. Spas are usually added as a separate fiberglass or gunite unit beside the pool rather than inside the liner structure. Tanning ledges and benches are formed and then covered with the liner.
Check vinyl liner pool builders in cities near Tulsa, or open the Oklahoma directory for every listed market in the state.
Claim your free PoolPad listing, check vinyl liner among the pool types you build, and show Tulsa homeowners what you install.
