South Carolina · Fiberglass Pool Builders & Installers · Updated 2026
Compare 24 fiberglass pool builders across South Carolina for fiberglass pool installation: ratings, review counts, the shell brands they carry and 2026 planning prices. City lists cover 10 South Carolina markets.
Every pool builder in South Carolina: see the full directory →
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Hot Springs Pools & Spas is a family-owned and operated pool and spa company serving Greenville, SC and communities throughout the Upstate. The company was...
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
A mid-size fiberglass pool (about 14×30) installed in South Carolina typically runs $55,000–$81,000 with standard equipment and a basic concrete deck. The shell itself is usually a third to half of that:
| Job | Typical South Carolina price |
|---|---|
| Shell only, delivered (small to large) | $17,000–$43,000 |
| Small shell installed (about 12×24) | $40,000–$57,000 |
| Mid-size shell installed (about 14×30) | $55,000–$81,000 |
| Large shell installed (about 16×40) | $76,000–$109,500+ |
| Built-in tanning ledge or splash pad model | $4,000–$8,500 |
| Attached fiberglass spa | $11,500–$24,000 |
| Decking and coping | $5,500–$15,000 |
| Equipment upgrades (heater, salt, automation) | $3,500–$11,500 |
| Crane or access fees | $1,400–$4,800 |
| Permits and engineering | $500–$2,900 |
South Carolina pricing is close to the national baseline used for these estimates. Shell brand and size set the base; crane access, backfill material, decking and the equipment package explain most of the spread between quotes for the same model.
Browse the manufacturer catalogs first — most installers carry one or two brands, and the model you want decides who can bid.
PoolPad tracks 24 fiberglass pool builders across South Carolina, with city lists for 10 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Coastal builds sit in sandy soil with high water tables — dewatering, hydrostatic relief, and never fully draining are standard practice, and salt air pushes equipment choices toward corrosion-resistant hardware. Upstate clay behaves like Georgia's: drainage design matters. Fiberglass shells arrive finished, so the local work is excavation, setting, plumbing and decking — the ground conditions and the crew's setting method matter more than with any other pool type.
The largest listed markets are North Charleston (9 companies), Charleston (8 companies), Goose Creek (8 companies).
Confirm the dealer is authorized by the shell manufacturer (that keeps the shell warranty valid), ask how the shell is leveled and backfilled, and compare quotes for the same model with the same deck and equipment. South Carolina licenses residential builders and specialty contractors at the state level — verify the license and insurance before signing. Pools permit through county or municipal offices with barrier/fence rules from the residential code, and beach-community HOAs and flood zones add review steps your builder should sequence early.
A mid-size fiberglass pool installed in South Carolina, SC typically runs $55,000–$81,000; small shells run $40,000–$57,000 and large shells $76,000–$109,500+. The shell itself is $17,000–$43,000 delivered. Decking ($5,500–$15,000), an attached spa ($11,500–$24,000) and equipment upgrades ($3,500–$11,500) are the common extras. South Carolina pricing is close to the national baseline used for these estimates.
The structural shell commonly carries a lifetime or 25-to-35-year warranty and the gelcoat surface 10 to 20 years before it may need recoating. Proper backfill and balanced water (especially calcium and pH) are what keep the surface and the structure in shape; cobalt staining and spider cracks are usually water-chemistry or installation issues rather than shell defects.
Once the permit is in hand, most fiberglass installs are swimmable in two to six weeks: a day or two to dig, a day to set and plumb the shell, a few days for the concrete collar and deck, then fill and startup. Shell lead times from the factory can add several weeks in spring. Installers dig as soon as the ground allows and book the spring slots early.
Fiberglass wins on speed, maintenance and long-term surface cost; gunite wins on custom shapes, depth, features and size. Installed prices for a mid-size pool are often similar once a gunite pool's finish and features are included, but a gunite pool will need a resurfacing in 10 to 20 years that a fiberglass pool usually does not. Pick by shape and size first, then compare total cost of ownership.
The outdoor season in South Carolina runs late April through early October — about 6 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. The Lowcountry swims from late April into October with subtropical humidity that raises sanitizer demand. The Upstate runs a little shorter and has colder winter nights. Coastal owners also need a hurricane-season equipment and water-care plan.
Premier Pools and Spas of Charleston has the highest customer rating on this South Carolina list at 5 stars across 56 reviews. Hot Springs Pools & Spas has the largest review count (650 reviews at 4.7 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Nearly anywhere a flatbed and a crane or excavator can reach the yard — tight side yards, overhead power lines and steep lots are the usual obstacles. High groundwater needs a well point or sump during the install, and expansive clay calls for a gravel base and careful backfill. A good installer will walk the access route before quoting.
Shells range from plunge pools around 8×14 to large models around 16×40, with depths of roughly 3½ to 8 feet. Most manufacturers offer rectangles, freeforms, lap pools and models with built-in tanning ledges, benches and spas. Size is limited by what can be shipped on a truck, so very large pools are built in gunite.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check fiberglass among the pool types you build, and show South Carolina homeowners which shells you install.
