Home Plunge Pool Builders Florida Coral Gables, FL

Florida · Plunge & Small Pool Builders · Updated 2026

Plunge Pool Builders in Coral Gables

A real pool in a small yard: 2 plunge pool builders serving Coral Gables, ranked by rating and review count, with what a plunge or cocktail pool costs installed in Coral Gables this year.

Directory area: in Coral Gables, FL Rankings are calculated separately for each directory; a company may appear in several.
2 Plunge pool builders
4.6/5 Average customer rating
197 Customer reviews

Top 2 Plunge pool builders in Coral Gables, FL

Ordered by customer rating and review count across the Coral Gables area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.

Fiberglass installers in Coral Gables with plunge models

Companies in the second group install fiberglass pools; most manufacturers offer plunge and cocktail shells — ask which small models they carry and whether they build custom gunite plunges too.

iGUi Pools – pool company in Miami, FL
4.1 (163 reviews)
Pool Builder
Miami, FL 10+ years in business (786) 207-1634
Gramar pool Florida – pool company in Homestead, FL
5 (34 reviews)
Pool Builder
Homestead, FL (954) 376-0392

Planning a new pool as well? The Coral Gables pool builders directory ranks all 26 builders in the area.

Coral Gables Plunge & small pools Prices · 2026

What a Plunge Pool Costs in Coral Gables

Installed in Coral Gables, a fiberglass plunge pool typically runs $33,500–$57,000 and a custom gunite plunge or spool $47,500–$85,500 — the small footprint saves on excavation and finish, but the equipment pad costs about the same as a full-size pool:

JobTypical Coral Gables price
Precast concrete plunge pool, installed$28,500–$52,500
Fiberglass plunge pool, installed$33,500–$57,000
Custom gunite plunge pool$47,500–$85,500
Spool (spa + pool) with jets and heater$57,000–$104,500
Heater (year-round use)$2,900–$7,600
Chiller (cold plunge)$3,800–$8,600
Swim jets or resistance current$5,000–$11,500
Decking and coping$4,000–$11,500
Permits and inspections$500–$2,900

Florida pricing is close to the national baseline used for these estimates. A plunge pool is not half the price of a full pool — the pump, filter, heater, electrical and permits are the same — but it fits where nothing else will and costs far less to heat and maintain.

Compact plunge pool with a bench and deck in a small backyard in Coral Gables
A fiberglass plunge pool installed in Coral Gables runs about $33,500–$57,000.
Hiring · Plunge Pool Builders

What a plunge pool quote should itemize

  • Type and dimensions. Fiberglass model, precast unit or custom gunite, with length, width and the (usually uniform) depth.
  • Access and excavation. How the shell or crew reaches a small yard — crane over the house, a mini excavator through a gate — and the haul-off.
  • Equipment sized for the volume. A compact pump and filter, the heater or chiller, and whether swim jets or spa jets are included.
  • Finish, coping and deck. Gelcoat color or plaster finish, coping material and the small deck or patio that surrounds it.
  • Permits and setbacks. Small pools still need permits and fencing in most cities, and side-yard setbacks decide where it can go.

Questions to ask a plunge pool builder

  1. Which plunge or cocktail models do you carry, and can you build a custom size in gunite?
  2. How will the shell or the crew get into my yard, and is the crane in the price?
  3. What does it cost to heat (or chill) this pool year-round here?
  4. Can swim jets, a bench and spa jets be added, and what do they change in the equipment?
  5. What permits, setbacks and barrier rules apply to a pool this size in my city?
Heated spool with spa jets in a courtyard in Coral Gables
Heat, jets and a bench turn a plunge pool into a year-round spool.

Heat it and you will use it

A heater on a 4,000-gallon pool costs little to run — it is the difference between a plunge pool used eight months a year and one used eight weeks.

Coral Gables Plunge Pool Builders Snapshot

Highest Customer Rating

Gramar pool Florida

5 stars from 34 reviews

View Company →

Most Reviewed

iGUi Pools

163 reviews, 4.1 star average

View Company →

Directory Totals

Coral Gables market

4.6 average customer rating · 197 reviews · 2 companies

See All on the Map →

Plunge & Small Pool Construction in Coral Gables

2 plunge pool builders serving Coral Gables. The ranked companies average 4.6 stars across 197 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.

The screened lanai pool is Florida's signature — often paired with a spillover spa, sun shelf, and pavers. Saltwater systems are closer to the default than the exception, heaters extend the shoulder months up north, and modern builds lean bright, shallow, and social. Smaller lots and higher construction costs have made plunge pools, cocktail pools and spools the fastest-growing pool type — a heated 8×16 pool costs a fraction to run and fits a courtyard.

For statewide rankings, city counts and Florida prices, see the Florida plunge pool builders directory, or check the nearby cities below.

Small-pool options Coral Gables builders offer

  • Plunge pools — roughly 7 to 10 feet wide and 12 to 20 feet long, a uniform 4 to 6 feet deep, for cooling off, soaking and lounging.
  • Cocktail pools — a plunge pool with built-in benches, a tanning shelf and often heat; the backyard social spot.
  • Spools — spa plus pool: a heated small pool with spa jets, sometimes a swim current, used year-round.
  • Cold plunges — a chilled plunge for recovery, often paired with a sauna or a hot tub.
  • Fiberglass, precast or gunite — fixed models install in days; custom gunite fits an odd space exactly.

Planning a plunge pool in Coral Gables

Measure the access route first — a crane over the house changes the budget. Decide on heat, jets and a bench up front, since they drive the equipment. Then compare a fiberglass model against a custom gunite price for the same footprint. Florida licenses pool contractors at the state level — look for a Certified or Registered Pool/Spa Contractor (CPC) license you can verify online. The Residential Swimming Pool Safety Act requires new pools to include at least one approved safety feature, like a barrier fence, self-closing door hardware, or an approved alarm; your builder should design for it from day one.

Coral Gables Plunge Pool Builders Questions

How much does a plunge pool cost in Coral Gables?

Installed in Coral Gables, FL, a fiberglass plunge pool typically runs $33,500–$57,000, a precast concrete plunge $28,500–$52,500 and a custom gunite plunge $47,500–$85,500. A spool with jets and a heater runs $57,000–$104,500. Decking adds $4,000–$11,500 and a heater $2,900–$7,600. Florida pricing is close to the national baseline used for these estimates.

How big is a plunge pool?

Most are 7 to 10 feet wide, 12 to 20 feet long and 4 to 6 feet deep with a flat floor — about 2,000 to 6,000 gallons versus 15,000 to 25,000 for a typical family pool. Cocktail pools add benches and a tanning shelf; spools are often 8×14 to 10×20 with spa jets.

Can you swim in a plunge pool?

You can cool off, float, soak and exercise in place; laps need a swim-jet or resistance-current system, which many plunge and spool builders install. For actual lap swimming a narrow lap pool of 30 feet or more is the better fit.

Is a plunge pool cheaper to run than a full pool in Coral Gables?

Much cheaper: a third or less of the water means a smaller pump, far less chemical use and a heater that brings the pool to temperature in an hour or two. Many owners here keep a plunge pool heated through the cooler months and use it year-round.

How long is the pool season in Coral Gables?

The prime outdoor season in Coral Gables runs March through November — and year-round from Orlando south — roughly 10 months of comfortable unheated swimming — and pools stay open and running year-round rather than being winterized. From Orlando south, pools are swimmable most of the year; North Florida gets a genuine but short winter. The flip side of paradise is summer: daily thunderstorms dump rain and debris, and 88° water eats chlorine — algae never really takes a month off here.

Which Coral Gables plunge pool builder has the highest customer rating?

Gramar pool Florida has the highest customer rating on this Coral Gables list at 5 stars across 34 reviews. iGUi Pools has the largest review count (163 reviews at 4.1 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.

Do plunge pools need a permit and a fence?

In most cities yes — any pool more than 18 to 24 inches deep needs a permit, electrical inspection and a barrier, regardless of footprint. Setbacks from property lines and the house decide where a small pool can go. Florida licenses pool contractors at the state level — look for a Certified or Registered Pool/Spa Contractor (CPC) license you can verify online. The Residential Swimming Pool Safety Act requires new pools to include at least one approved safety feature, like a barrier fence, self-closing door hardware, or an approved alarm; your builder should design for it from day one.

How long does a plunge pool take to install?

A fiberglass or precast plunge pool is often swimmable one to three weeks after excavation; a custom gunite plunge takes six to ten weeks because the shell has to cure before the finish. Permits add time up front, and the deck follows the pool.

Map of Plunge pool builders Near Coral Gables

Build Plunge Pools in Coral Gables?

Claim your free PoolPad listing, check plunge and small pools among the pool types you build, and show Coral Gables homeowners with a small yard what fits.