Nevada · Plunge & Small Pool Builders · Updated 2026

Plunge Pool Builders in Reno

Compare 2 plunge pool builders serving Reno for plunge and small-pool construction. Ratings, review counts, contact details and 2026 planning prices are below.

Directory area: in Reno, NV Rankings are calculated separately for each directory; a company may appear in several.
2 Plunge pool builders
4.4/5 Average customer rating
88 Customer reviews

Top 2 Plunge pool builders in Reno, NV

Ordered by customer rating and review count across the Reno area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.

Fiberglass installers in Reno with plunge models

Companies in the second group install fiberglass pools; most manufacturers offer plunge and cocktail shells — ask which small models they carry and whether they build custom gunite plunges too.

Battle Born Pool & Spa – pool company in Sparks, NV
4.6 (51 reviews)
Contractor Pool Builder
Sparks, NV 7+ years in business (775) 313-4323
Certified Pool and Spa – pool company in Reno, NV
4.1 (37 reviews)
Pool Builder
Reno, NV 10+ years in business (775) 852-8405

Planning a new pool as well? The Reno pool builders directory ranks all 11 builders in the area.

Reno Plunge & small pools Prices · 2026

What a Plunge Pool Costs in Reno

Installed in Reno, a fiberglass plunge pool typically runs $37,000–$63,000 and a custom gunite plunge or spool $52,500–$94,500 — the small footprint saves on excavation and finish, but the equipment pad costs about the same as a full-size pool:

JobTypical Reno price
Precast concrete plunge pool, installed$31,500–$58,000
Fiberglass plunge pool, installed$37,000–$63,000
Custom gunite plunge pool$52,500–$94,500
Spool (spa + pool) with jets and heater$63,000–$115,500
Heater (year-round use)$3,200–$8,400
Chiller (cold plunge)$4,200–$9,500
Swim jets or resistance current$5,500–$12,500
Decking and coping$4,000–$12,500
Permits and inspections$500–$3,200

Nevada pricing is close to the national baseline used for these estimates. A plunge pool is not half the price of a full pool — the pump, filter, heater, electrical and permits are the same — but it fits where nothing else will and costs far less to heat and maintain.

Compact plunge pool with a bench and deck in a small backyard in Reno
A fiberglass plunge pool installed in Reno runs about $37,000–$63,000.
Hiring · Plunge Pool Builders

What a plunge pool quote should itemize

  • Type and dimensions. Fiberglass model, precast unit or custom gunite, with length, width and the (usually uniform) depth.
  • Access and excavation. How the shell or crew reaches a small yard — crane over the house, a mini excavator through a gate — and the haul-off.
  • Equipment sized for the volume. A compact pump and filter, the heater or chiller, and whether swim jets or spa jets are included.
  • Finish, coping and deck. Gelcoat color or plaster finish, coping material and the small deck or patio that surrounds it.
  • Permits and setbacks. Small pools still need permits and fencing in most cities, and side-yard setbacks decide where it can go.

Questions to ask a plunge pool builder

  1. Which plunge or cocktail models do you carry, and can you build a custom size in gunite?
  2. How will the shell or the crew get into my yard, and is the crane in the price?
  3. What does it cost to heat (or chill) this pool year-round here?
  4. Can swim jets, a bench and spa jets be added, and what do they change in the equipment?
  5. What permits, setbacks and barrier rules apply to a pool this size in my city?
Heated spool with spa jets in a courtyard in Reno
Heat, jets and a bench turn a plunge pool into a year-round spool.

Heat it and you will use it

A heater on a 4,000-gallon pool costs little to run — it is the difference between a plunge pool used eight months a year and one used eight weeks.

Reno Plunge Pool Builders Snapshot

Highest Customer Rating

Battle Born Pool & Spa

4.6 stars from 51 reviews

View Company →

Most Reviewed

Battle Born Pool & Spa

51 reviews, 4.6 star average

View Company →

Directory Totals

Reno market

4.4 average customer rating · 88 reviews · 2 companies

See All on the Map →

Plunge & Small Pool Construction in Reno

2 plunge pool builders serving Reno. The ranked companies average 4.4 stars across 88 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.

Vegas builds for drama — raised spas, fire bowls, sheer descents, and lighting designed for night swimming, because July days are for staying indoors. Pebble interiors and travertine decks dominate, and cocktail pools are growing on smaller lots. Smaller lots and higher construction costs have made plunge pools, cocktail pools and spools the fastest-growing pool type — a heated 8×16 pool costs a fraction to run and fits a courtyard.

For statewide rankings, city counts and Nevada prices, see the Nevada plunge pool builders directory, or check the nearby cities below.

Small-pool options Reno builders offer

  • Plunge pools — roughly 7 to 10 feet wide and 12 to 20 feet long, a uniform 4 to 6 feet deep, for cooling off, soaking and lounging.
  • Cocktail pools — a plunge pool with built-in benches, a tanning shelf and often heat; the backyard social spot.
  • Spools — spa plus pool: a heated small pool with spa jets, sometimes a swim current, used year-round.
  • Cold plunges — a chilled plunge for recovery, often paired with a sauna or a hot tub.
  • Fiberglass, precast or gunite — fixed models install in days; custom gunite fits an odd space exactly.

Planning a plunge pool in Reno

Measure the access route first — a crane over the house changes the budget. Decide on heat, jets and a bench up front, since they drive the equipment. Then compare a fiberglass model against a custom gunite price for the same footprint. Pool contractors are licensed by the Nevada State Contractors Board with license limits and bonding you can verify online — check both. Clark County and the valley cities enforce detailed pool barrier codes (fencing, self-latching gates, door alarms), and most master-planned communities layer HOA architectural review on top; sequence that approval early.

Reno Plunge Pool Builders Questions

How much does a plunge pool cost in Reno?

Installed in Reno, NV, a fiberglass plunge pool typically runs $37,000–$63,000, a precast concrete plunge $31,500–$58,000 and a custom gunite plunge $52,500–$94,500. A spool with jets and a heater runs $63,000–$115,500. Decking adds $4,000–$12,500 and a heater $3,200–$8,400. Nevada pricing is close to the national baseline used for these estimates.

How big is a plunge pool?

Most are 7 to 10 feet wide, 12 to 20 feet long and 4 to 6 feet deep with a flat floor — about 2,000 to 6,000 gallons versus 15,000 to 25,000 for a typical family pool. Cocktail pools add benches and a tanning shelf; spools are often 8×14 to 10×20 with spa jets.

Can you swim in a plunge pool?

You can cool off, float, soak and exercise in place; laps need a swim-jet or resistance-current system, which many plunge and spool builders install. For actual lap swimming a narrow lap pool of 30 feet or more is the better fit.

Is a plunge pool cheaper to run than a full pool in Reno?

Much cheaper: a third or less of the water means a smaller pump, far less chemical use and a heater that brings the pool to temperature in an hour or two. Many owners here keep a plunge pool heated through the cooler months and use it year-round.

How long is the pool season in Reno?

The prime outdoor season in Reno runs April through October — roughly 6 months of comfortable unheated swimming — and pools stay open and running year-round rather than being winterized. Southern Nevada swims April through October with desert-dry air, triple-digit summers, and pools that commonly stay open through cold winters. Reno's season is closer to four months and requires a deliberate winter plan. Statewide, evaporation and UV drive water loss and sanitizer demand.

Which Reno plunge pool builder has the highest customer rating?

Battle Born Pool & Spa has the highest customer rating on this Reno list at 4.6 stars across 51 reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.

Do plunge pools need a permit and a fence?

In most cities yes — any pool more than 18 to 24 inches deep needs a permit, electrical inspection and a barrier, regardless of footprint. Setbacks from property lines and the house decide where a small pool can go. Pool contractors are licensed by the Nevada State Contractors Board with license limits and bonding you can verify online — check both. Clark County and the valley cities enforce detailed pool barrier codes (fencing, self-latching gates, door alarms), and most master-planned communities layer HOA architectural review on top; sequence that approval early.

How long does a plunge pool take to install?

A fiberglass or precast plunge pool is often swimmable one to three weeks after excavation; a custom gunite plunge takes six to ten weeks because the shell has to cure before the finish. Permits add time up front, and the deck follows the pool.

Map of Plunge pool builders Near Reno

Build Plunge Pools in Reno?

Claim your free PoolPad listing, check plunge and small pools among the pool types you build, and show Reno homeowners with a small yard what fits.