Washington · Pool Deck & Patio Contractors · Updated 2026
Cracked, hot or dated pool deck? 32 pool deck and patio contractors across Washington, ranked by rating and review count, with what deck resurfacing, pavers and a new patio cost in Washington this year. City lists cover 16 Washington markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Resurfacing an existing concrete deck with an overlay or coating in Washington typically runs $5,000–$14,500; a new deck depends on the material and the square footage:
| Job | Typical Washington price |
|---|---|
| Deck resurfacing (overlay, spray texture, coating) | $5,000–$14,500 |
| New broom-finish or stamped concrete | $7,200–$18,000 for 600 sq ft |
| Concrete pavers | $14–$30 / sq ft |
| Travertine or natural stone | $18–$38 / sq ft |
| Crack, lift and drainage repair | $600–$3,000 |
| Sealing an existing deck | $325–$1,000 |
| Pergola or shade structure | $3,500–$14,500 |
| Outdoor kitchen | $9,500–$36,000+ |
Washington pricing is above the national baseline used for these estimates, mainly on labor and permitting. Demolition of the old deck, grading and drainage, the coping tie-in and access for equipment are the line items that move a quote; a deck that slopes toward the pool or holds water needs the drainage fixed before any surface goes on.
Conduit for lighting, a gas stub for a kitchen or fire feature and footings for shade cost little while the deck is open and a lot afterwards.
PoolPad tracks 32 pool deck and patio contractors across Washington, with city lists for 16 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Westside builds manage rain: drainage design, winter dig logistics, and slope engineering on view lots are the recurring themes, with glacial till and the occasional boulder in the dig. Eastside soils dig easier but winters freeze harder — frost-depth plumbing statewide. Fiberglass and vinyl lead for install speed under rain-window scheduling; gunite serves the view-lot high end. Heat pumps, automatic covers, and integrated hot tubs are the regional standard kit.
The largest listed markets are Bellevue (22 companies), Bremerton (22 companies), Federal Way (19 companies).
Look at decks the contractor finished several years ago, not just new ones — settling, heaving and joint failure take a few seasons to show. Confirm licensing where Washington requires it and insurance, and get drainage, base preparation and the coping joint spelled out in the contract. Washington requires contractor registration with bonding and insurance — verify both on the state's site in a minute. Pool permits and residential-code barrier requirements run through your city or county, and critical-area rules (slopes, streams, wetlands) add review on plenty of Puget Sound lots.
Resurfacing an existing concrete deck in Washington, WA typically runs $5,000–$14,500. New concrete runs $7,200–$18,000 for 600 sq ft, pavers $14–$30 / sq ft and travertine $18–$38 / sq ft installed. Crack and drainage repairs run $600–$3,000 and sealing $325–$1,000. Washington pricing is above the national baseline used for these estimates, mainly on labor and permitting; demolition, grading and the coping tie-in move the number most, so compare itemized bids for the same square footage.
Yes, if the slab is structurally sound: no major heaving, wide moving cracks or drainage toward the pool. Spray-texture and stamped overlays bond to the old concrete and add a cooler, slip-resistant surface for a fraction of a new deck. A slab that pumps water toward the pool, has sunk at the coping or is badly cracked should be removed and rebuilt with proper base and drainage.
Light-colored travertine and honed natural stone stay the coolest, followed by light concrete pavers and textured overlays with a light acrylic coating; dark stone, dark pavers and plain broom-finish concrete get the hottest. In sunny climates ask to stand on wet samples on a hot afternoon before choosing.
Resurfacing an existing deck usually takes two to five days including prep and cure; a new poured-concrete deck one to two weeks with forming, pour, cure and sealing; pavers and travertine one to three weeks depending on the base work and cutting around the coping. Add time for kitchens, shade structures and any permit inspections.
The outdoor season in Washington runs mid-June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. West of the Cascades expect a mid-June-to-September window with mild, gray shoulders — heat pumps and solar covers are what make the investment rational. East of the mountains, summers hit 95°+ and the season stretches noticeably longer.
JPS Builders has the highest customer rating on this Washington list at 5 stars across 128 reviews. Matvey Foundation Repair has the largest review count (468 reviews at 4.8 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Often for the parts that involve electrical, gas, structures or drainage changes — a kitchen, fire feature, pergola or a deck that changes grading — and always if the barrier or fence is affected. Concrete resurfacing rarely needs one. Washington requires contractor registration with bonding and insurance — verify both on the state's site in a minute. Pool permits and residential-code barrier requirements run through your city or county, and critical-area rules (slopes, streams, wetlands) add review on plenty of Puget Sound lots.
Control joints spaced correctly, a compacted base, proper slope and a maintained expansion joint at the coping do most of the work. Seal concrete every two to three years, keep sprinklers off the deck, and fix drainage that lets water under the slab — freeze-thaw and washed-out base are what lift and crack decks.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check decks and outdoor living among your services, and show Washington homeowners planning the yard around their pool what you build.
