Mississippi · Pool Remodeling & Resurfacing · Updated 2026
23 pool remodeling companies in the Gulfport area, ordered by customer rating and review count, with 2026 resurfacing and remodel price ranges so you can compare a replaster against a full renovation. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it. This page shows the top 20.
Ordered by customer rating and review count across the Gulfport area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Gulfport pool builders directory ranks all 30 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Gulfport typically runs $4,500–$8,500, while pebble and quartz finishes run $7,000–$15,500. Everything else stacks on top of that:
| Job | Typical Gulfport price |
|---|---|
| Replaster (white plaster) | $4,500–$8,500 |
| Pebble or quartz finish | $7,000–$15,500 |
| Waterline tile | $2,100–$6,800 |
| Coping replacement | $2,600–$7,700 |
| Deck resurfacing | $3,500–$10,000 |
| Equipment upgrade (pump, filter, heater, automation) | $2,500–$8,500 |
| Add an attached spa | $13,000–$30,000 |
| Full remodel (finish, tile, coping, deck, equipment) | $13,000–$51,000+ |
Mississippi pricing is below the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Gulfport market
4.3 average customer rating · 340 reviews · 23 companies · 1 specialist
See All on the Map →23 pool remodeling companies in the Gulfport area. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it. The ranked companies average 4.3 stars across 340 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Yazoo clay around Jackson is genuinely expansive — shells there need conservative engineering and great drainage, and a local builder will talk about it unprompted (treat that as a good sign). The coast brings sand and water-table management; hurricane-zone equipment anchoring matters south of I-10. Vinyl liner and gunite split the market by budget, with fiberglass growing for speed. Gulf builds lean screened and salt-friendly; inland, simple rectangles with tanning ledges and generous decks fit both the lots and the budgets.
For statewide rankings, city counts and Mississippi prices, see the Mississippi pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Mississippi requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Mississippi licenses residential builders at the state level for larger projects — verify the license and insurance before you sign. Pool permitting and barrier/fence rules are handled by city and county offices, and coastal counties add wind and flood-zone considerations your builder should already know cold.
A standard white plaster replaster in Gulfport, MS typically runs $4,500–$8,500; quartz and pebble finishes run $7,000–$15,500. Waterline tile adds $2,100–$6,800 and new coping $2,600–$7,700. A full remodel that also updates the deck and equipment runs $13,000–$51,000+. Mississippi pricing is below the national baseline used for these estimates; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Gulfport runs April through October — about 7 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. The season stretches April through October, and the Gulf Coast pushes longer. Heat plus humidity means algae never sleeps in summer, afternoon storms are routine, and winters are mild enough that a full northern-style close is optional in the southern half of the state.
Latitude 30 pool restoration has the highest customer rating on this Gulfport list at 5 stars across 9 reviews. Bay Pool Company has the largest review count (49 reviews at 4.4 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Mississippi licenses residential builders at the state level for larger projects — verify the license and insurance before you sign. Pool permitting and barrier/fence rules are handled by city and county offices, and coastal counties add wind and flood-zone considerations your builder should already know cold.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Gulfport, or open the Mississippi directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Gulfport homeowners planning a renovation what you do.
