New Jersey · Pool Remodeling & Resurfacing · Updated 2026
106 pool remodeling companies across New Jersey, ordered by customer rating and review count, with 2026 resurfacing and remodel price ranges so you can compare a replaster against a full renovation. 6 are listed as specialists for this work; the rest are pool builders that routinely handle it. City lists cover 17 New Jersey markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Resurfacing is the anchor job: a standard white plaster replaster in New Jersey typically runs $6,500–$12,500, while pebble and quartz finishes run $10,000–$22,500. Everything else stacks on top of that:
| Job | Typical New Jersey price |
|---|---|
| Replaster (white plaster) | $6,500–$12,500 |
| Pebble or quartz finish | $10,000–$22,500 |
| Waterline tile | $3,100–$10,000 |
| Coping replacement | $3,800–$11,300 |
| Deck resurfacing | $5,000–$15,000 |
| Equipment upgrade (pump, filter, heater, automation) | $4,000–$12,500 |
| Add an attached spa | $19,000–$44,000 |
| Full remodel (finish, tile, coping, deck, equipment) | $19,000–$75,000+ |
New Jersey pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
PoolPad tracks 106 pool remodeling companies across New Jersey, with city lists for 17 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
North Jersey digs glacial till and the occasional ledge; South Jersey digs sand — bids reflect it. Frost-depth plumbing, freeze-tolerant decking, and drainage on tight suburban lots are the local engineering staples, and shore builds add corrosion-resistant equipment for salt air. Vinyl liner with concrete or paver decks is the Jersey workhorse; gunite with spas leads in the wealthier counties. Automatic covers, heat pumps, and salt systems are all mainstream here.
The largest listed markets are Jersey City (74 companies), Bayonne (72 companies), Newark (72 companies).
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where New Jersey requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. New Jersey home improvement contractors register with the state — verify the registration and insurance certificates — and pools permit through your town under the Uniform Construction Code, including its barrier subcode (fencing, gates, alarms on doors where required). Shore towns add flood-zone and dune rules; HOA review is common in newer developments.
A standard white plaster replaster in New Jersey, NJ typically runs $6,500–$12,500; quartz and pebble finishes run $10,000–$22,500. Waterline tile adds $3,100–$10,000 and new coping $3,800–$11,300. A full remodel that also updates the deck and equipment runs $19,000–$75,000+. New Jersey pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three companies for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in New Jersey runs late May through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. The season runs roughly Memorial Day to mid-September, with heaters extending both ends. Humid summers increase sanitizer demand, and freezing winters make a thorough close standard practice.
Pool Renovation LLC has the highest customer rating on this New Jersey list at 5 stars across 4 reviews. Central Jersey Pools Patio & More has the largest review count (1,010 reviews at 4.8 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
New Jersey home improvement contractors register with the state — verify the registration and insurance certificates — and pools permit through your town under the Uniform Construction Code, including its barrier subcode (fencing, gates, alarms on doors where required). Shore towns add flood-zone and dune rules; HOA review is common in newer developments.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check the services you offer, and show New Jersey homeowners planning a renovation what you do.