Montana · Vinyl Liner Pool Builders & Installers · Updated 2026
The lowest-cost way to a permanent inground pool: 1 vinyl liner pool builders across Montana, ranked by rating and review count, with 2026 prices for a vinyl liner pool in Montana.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
There is not a separate city list for Montana yet. Use the statewide results above, or browse the Montana pool service directory.
A mid-size vinyl liner pool (about 16×32) installed in Montana typically runs $49,500–$77,000 with standard equipment and a basic deck. The liner itself is replaced every eight to twelve years at $4,400–$7,700:
| Job | Typical Montana price |
|---|---|
| Small vinyl liner pool (about 12×24), installed | $38,500–$55,000 |
| Mid-size pool (about 16×32), installed | $49,500–$77,000 |
| Large pool (about 20×40), installed | $71,500–$104,500+ |
| Polymer wall upgrade over steel | $2,200–$5,500 |
| Vinyl-covered steps, benches or sun ledge | $2,200–$6,600 |
| Decking and coping | $5,500–$16,500 |
| Equipment upgrades (heater, salt, automation) | $3,500–$10,000 |
| Safety cover | $2,200–$4,400 |
| Permits and inspections | $400–$2,800 |
| Liner replacement, later (every 8–12 years) | $4,400–$7,700 |
Montana pricing is above the national baseline used for these estimates, mainly on labor and permitting. Rectangles cost less than freeforms, steel walls less than polymer, and a thicker liner (27 or 28 mil) adds a little up front and years to the first replacement.
The second liner is part of the real cost of a vinyl pool — ask every bidder what a replacement will run and how long the first one should last.
PoolPad tracks 1 vinyl liner pool builders across Montana. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Rocky ground and river cobble make excavation the wildcard — get rock language in writing — and frost-depth plumbing plus robust winterization design are standard. Bozeman-area builds often pair pools with significant landscape and terrace work. Vinyl liner pools dominate freezing climates because the wall system tolerates frost heave better than a rigid finish and the liner is forgiving of winterization.
Ask about the wall system, floor material and liner gauge, confirm the liner warranty in writing, and get a price for the first liner replacement now so you know the long-term cost. Compare at least three itemized bids for the same size and shape. Montana registers construction contractors at the state level — verify registration and insurance. Pool permits and residential-code barrier requirements run through your city or county building office; resort-town design review boards can add a step in places like Big Sky and Whitefish.
A mid-size vinyl liner pool installed in Montana, MT typically runs $49,500–$77,000; small pools run $38,500–$55,000 and large pools $71,500–$104,500+. Decking adds $5,500–$16,500 and a safety cover $2,200–$4,400. Budget $4,400–$7,700 for a liner replacement every eight to twelve years. Montana pricing is above the national baseline used for these estimates, mainly on labor and permitting.
Eight to twelve years is typical, longer with a thicker liner, balanced water and a cover. Fading, brittleness, wrinkles and leaks at seams or fittings are the signs it is time. Replacement is a one-to-three-day job once the new liner arrives, and the pool is otherwise unchanged.
Usually four to eight weeks after permits: a few days to dig and set the walls, a week or two for plumbing, the floor and the deck, then the liner is installed and the pool filled in a day. Custom liners are made to measure and can take two to four weeks to arrive. Liners install best in warm weather, so spring and summer book first.
The smooth surface uses fewer chemicals than plaster and never needs resurfacing, but the liner itself is the recurring cost — roughly the price of a resurfacing spread over a similar interval. Keep the water balanced, avoid letting the level drop, and use a cover to extend liner life.
The outdoor season in Montana runs mid-June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. The unheated season runs mid-June through early September, with cool nights even in July. A heater materially extends use, and winters are long and hard-freezing statewide.
Erickson's Pools & Spas has the highest customer rating on this Montana list at 5 stars across 8 reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Both perform well. Galvanized steel panels are the lower-cost standard and very strong; polymer (plastic) panels cost more but cannot rust and suit salt systems, coastal air and wet soils. Either way, ask how the panels are braced and how the deck is tied to the walls so the coping does not shift.
Yes — walls are built on site, so the depth profile is yours to choose, including diving depths. Spas are usually added as a separate fiberglass or gunite unit beside the pool rather than inside the liner structure. Tanning ledges and benches are formed and then covered with the liner.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check vinyl liner among the pool types you build, and show Montana homeowners what you install.
