Montana · Pool Leak Detection & Repair · Updated 2026
2 pool leak detection companies across Montana — pressure testing, dye tests, electronic listening and underground plumbing repair — ordered by customer rating and review count, with 2026 detection prices.
Every pool service company in Montana: see the full directory →
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Dedicated leak companies bring pressure-testing and listening gear; repair companies find most plumbing and fitting leaks and call in a specialist for the hard ones.
There is not a separate city list for Montana yet. Use the statewide results above, or browse the Montana pool service directory.
A full leak detection in Montana — pressure testing every line, dye testing the shell and listening for underground breaks — typically runs $275–$525, with the repair priced separately:
| Job | Typical Montana price |
|---|---|
| Full leak detection (pressure + dye + electronic) | $275–$525 |
| Pressure test only | $150–$325 |
| Skimmer or return fitting repair | $300–$1,250 |
| Light niche / conduit seal | $275–$950 |
| Vinyl liner patch | $100–$325 |
| Structural crack repair (staples, epoxy) | $500–$2,600 |
| Underground plumbing repair | $500–$3,200 |
Montana labor rates are above the national baseline used for these estimates, mainly on labor and permitting. Most leaks turn out to be at fittings, the skimmer throat, the light niche or the equipment pad — cheap fixes once found. Underground line breaks that need the deck cut cost the most, so ask how the company pinpoints them before digging.
A 24-hour bucket test tells you whether the loss is evaporation and whether it happens with the pump on or off — the two facts that shape the detection visit.
PoolPad tracks 2 pool leak detection companies across Montana. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Rocky ground and river cobble make excavation the wildcard — get rock language in writing — and frost-depth plumbing plus robust winterization design are standard. Bozeman-area builds often pair pools with significant landscape and terrace work. Ground movement and freeze cycles stress plumbing and shells here, so spring is when many leaks appear — often at fittings that moved over winter.
Run a bucket test for 24 hours with the pump on, then off, and note the difference — losing water only with the pump running points to the pressure side, only with it off to the suction side or shell. Check the pad for wet ground and the backwash line. That information lets the company quote the right test and often shortens the visit.
A full leak detection in Montana, MT — pressure testing the lines, dye testing the shell and electronic listening — typically runs $275–$525, with a pressure test alone at $150–$325. Repairs are priced separately: a skimmer or return fitting $300–$1,250, a light niche seal $275–$950, a structural crack $500–$2,600, and an underground plumbing repair $500–$3,200 depending on how much deck has to be opened. Montana labor is above the national baseline used for these estimates, mainly on labor and permitting.
Do a bucket test: set a bucket of pool water on a step, mark both water levels, and compare after 24 hours with the pump running, then repeat with it off. Evaporation drops both marks equally; a leak drops the pool more. Summer evaporation runs roughly a quarter inch a day, more with wind, heat and a spa spillover. Losing an inch or more a day, wet spots around the deck or pad, or air in the pump basket point to a leak.
Usually. Fittings, skimmer throats, light niches, small plaster cracks and vinyl patches are repaired underwater with epoxy, putty or patch kits. Underground plumbing is repaired by cutting a small section of deck, or by relining or rerouting the line. Draining is reserved for large structural cracks or a full resurfacing.
Evaporation alone typically costs an inch or two a week in Montana during mid-June through early September, more in hot, dry or windy weather and when a heater or spa spillover is running. Splash-out and backwashing add to it. If you are topping off more than a couple of inches a week, or the autofill runs constantly, get a detection visit — a small leak wastes thousands of gallons and the chemicals in them.
The outdoor season in Montana runs mid-June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. The unheated season runs mid-June through early September, with cool nights even in July. A heater materially extends use, and winters are long and hard-freezing statewide.
Aqua Systems Spa & Pool Technology, Inc. has the highest customer rating on this Montana list at 5 stars across 3 reviews. 5 Star Pool and Spa Service has the largest review count (37 reviews at 4.7 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Rarely for the leak itself: wear, tear and gradual damage are excluded from most policies. Sudden events — a pipe burst by a freeze, or damage caused by a covered peril — may be covered along with resulting damage to the deck or house. Keep the detection report and photos; some policies reimburse the detection fee when the resulting repair is covered.
A full detection visit usually takes two to four hours: pressure testing each line, dye testing the shell, listening for underground breaks and, if needed, a diver. Simple repairs at fittings are often done the same day; underground plumbing repairs that require cutting and patching the deck take one to three days including concrete cure.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check leak detection among your services, and show Montana pool owners losing water that you can find the problem.
