Connecticut · Above-Ground Pool Installers & Dealers · Updated 2026
A swimming pool this season without a construction project: 8 above-ground pool installers serving Bristol, ranked by rating and review count, with what an above-ground pool costs installed in Bristol this year.
Ordered by customer rating and review count across the Bristol area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Planning a new pool as well? The Bristol pool builders directory ranks all 36 builders in the area.
A 24-foot round pool kit runs $2,500–$7,000 and professional installation in Bristol adds $1,700–$4,400, so a complete installed pool with pump and filter typically lands between the two kit prices plus labor. Semi-inground pools and decks are the big step up:
| Job | Typical Bristol price |
|---|---|
| Round pool kit (about 24 ft), walls, liner, pump & filter | $2,500–$7,000 |
| Oval pool kit (about 15×30) | $4,000–$10,000 |
| Semi-inground pool, installed | $9,500–$24,000 |
| Professional installation (kit assembly, liner, equipment) | $1,700–$4,400 |
| Site prep and leveling | $550–$2,200 |
| Electrical (GFCI circuit, bonding) | $550–$1,650 |
| Deck or platform around the pool | $3,500–$18,000 |
| Equipment upgrades (heater, salt system, robot) | $600–$3,500 |
| Liner replacement, later (every 5–9 years) | $650–$2,200 |
Connecticut labor is above the national baseline used for these estimates, mainly on labor and permitting; pool kits are priced nationally. Wall gauge and resin-versus-steel frames, a sloped yard that needs leveling, and the deck decide most of the spread between quotes.
A pool set within an inch of level lasts; one set on a slope stretches the liner and buckles the wall. Pay for the site prep.
Bristol market
4.5 average customer rating · 455 reviews · 8 companies
See All on the Map →8 above-ground pool installers serving Bristol. The ranked companies average 4.5 stars across 455 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Above-ground pools are the practical choice across much of Connecticut: the season is June through mid-September, the pool is winterized each fall, and a resin or heavy-gauge steel wall shrugs off the freeze-thaw that cracks cheap kits.
For statewide rankings, city counts and Connecticut prices, see the Connecticut above-ground pool installers directory, or check the nearby cities below.
Buy from a dealer that installs what it sells or hires a crew that does: a level base, a wrinkle-free liner and a correctly sized pump are what separate a 15-year pool from a two-season one. Check your city's permit and fence rules before the pool is ordered.
A 24-foot round kit runs $2,500–$7,000 and an oval kit $4,000–$10,000; professional installation in Bristol, CT adds $1,700–$4,400 plus $550–$2,200 for site prep and $550–$1,650 for the electrical. A semi-inground pool installed runs $9,500–$24,000, and a deck $3,500–$18,000. Connecticut labor is above the national baseline used for these estimates, mainly on labor and permitting.
A quality steel or resin pool lasts 10 to 20 years; the liner is the wear item at five to nine years, and the pump and filter last eight to twelve. Keeping the water balanced, the pool full and the frame away from sprinklers and chemicals stored nearby is what extends it.
Most crews level the site and assemble a round pool in one day, with the liner set and the pool filling by evening; ovals and semi-inground pools take two to three days, and a deck is a separate job afterward. Filling takes 12 to 36 hours depending on size and water pressure.
Many cities require a permit and a barrier for any pool more than 24 inches deep, and nearly all require the electrical to be permitted and bonded. Walls over 48 inches often count as part of the barrier if the ladder is removable or lockable. Connecticut home improvement contractors register with the state Department of Consumer Protection — verify it along with insurance certificates. Pools permit through your town's building office with residential-code barrier requirements (fencing, self-latching gates, and alarms where required); shoreline towns and inland wetlands commissions can add review steps.
The outdoor season in Bristol runs June through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. Realistically June to mid-September unheated, with heaters buying May and October. Humid summers, cold winters, and a hard freeze season mean full winterization is simply part of owning a pool here.
Platinum pools has the highest customer rating on this Bristol list at 5 stars across 47 reviews. Aquatic Pool & Spa Services, Inc. has the largest review count (209 reviews at 4.6 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Only pools built for it — semi-inground models have reinforced walls designed for backfill. Burying a standard above-ground pool voids its warranty and can collapse the wall when it is drained. Semi-inground pools cost more than above-ground kits but far less than a full inground pool.
A handy owner can assemble a round kit on a level site in a weekend, but leveling, liner setting and the electrical are where most DIY pools go wrong. Professional installation is a fraction of the pool's price and most dealers' warranties assume it.
Check above-ground pool installers in cities near Bristol, or open the Connecticut directory for every listed market in the state.
Claim your free PoolPad listing, check above-ground among the pool types you install, and show Bristol families shopping for a pool this season what you carry.
