Mississippi · Plunge & Small Pool Builders · Updated 2026
Compare 9 plunge pool builders serving Biloxi for plunge and small-pool construction. Ratings, review counts, contact details and 2026 planning prices are below. 3 are listed as specialists for this work; the rest are fiberglass pool installers that routinely handle it.
Ordered by customer rating and review count across the Biloxi area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Companies in the second group install fiberglass pools; most manufacturers offer plunge and cocktail shells — ask which small models they carry and whether they build custom gunite plunges too.
Planning a new pool as well? The Biloxi pool builders directory ranks all 28 builders in the area.
Installed in Biloxi, a fiberglass plunge pool typically runs $30,000–$51,000 and a custom gunite plunge or spool $42,500–$76,500 — the small footprint saves on excavation and finish, but the equipment pad costs about the same as a full-size pool:
| Job | Typical Biloxi price |
|---|---|
| Precast concrete plunge pool, installed | $25,500–$47,000 |
| Fiberglass plunge pool, installed | $30,000–$51,000 |
| Custom gunite plunge pool | $42,500–$76,500 |
| Spool (spa + pool) with jets and heater | $51,000–$93,500 |
| Heater (year-round use) | $2,600–$6,800 |
| Chiller (cold plunge) | $3,400–$7,700 |
| Swim jets or resistance current | $4,500–$10,000 |
| Decking and coping | $3,500–$10,000 |
| Permits and inspections | $400–$2,600 |
Mississippi pricing is below the national baseline used for these estimates. A plunge pool is not half the price of a full pool — the pump, filter, heater, electrical and permits are the same — but it fits where nothing else will and costs far less to heat and maintain.
A heater on a 4,000-gallon pool costs little to run — it is the difference between a plunge pool used eight months a year and one used eight weeks.
Biloxi market
4.4 average customer rating · 231 reviews · 9 companies · 3 specialists
See All on the Map →9 plunge pool builders serving Biloxi. 3 are listed as specialists for this work; the rest are fiberglass pool installers that routinely handle it. The ranked companies average 4.4 stars across 231 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Vinyl liner and gunite split the market by budget, with fiberglass growing for speed. Gulf builds lean screened and salt-friendly; inland, simple rectangles with tanning ledges and generous decks fit both the lots and the budgets. Smaller lots and higher construction costs have made plunge pools, cocktail pools and spools the fastest-growing pool type — a heated 8×16 pool costs a fraction to run and fits a courtyard.
For statewide rankings, city counts and Mississippi prices, see the Mississippi plunge pool builders directory, or check the nearby cities below.
Measure the access route first — a crane over the house changes the budget. Decide on heat, jets and a bench up front, since they drive the equipment. Then compare a fiberglass model against a custom gunite price for the same footprint. Mississippi licenses residential builders at the state level for larger projects — verify the license and insurance before you sign. Pool permitting and barrier/fence rules are handled by city and county offices, and coastal counties add wind and flood-zone considerations your builder should already know cold.
Installed in Biloxi, MS, a fiberglass plunge pool typically runs $30,000–$51,000, a precast concrete plunge $25,500–$47,000 and a custom gunite plunge $42,500–$76,500. A spool with jets and a heater runs $51,000–$93,500. Decking adds $3,500–$10,000 and a heater $2,600–$6,800. Mississippi pricing is below the national baseline used for these estimates.
Most are 7 to 10 feet wide, 12 to 20 feet long and 4 to 6 feet deep with a flat floor — about 2,000 to 6,000 gallons versus 15,000 to 25,000 for a typical family pool. Cocktail pools add benches and a tanning shelf; spools are often 8×14 to 10×20 with spa jets.
You can cool off, float, soak and exercise in place; laps need a swim-jet or resistance-current system, which many plunge and spool builders install. For actual lap swimming a narrow lap pool of 30 feet or more is the better fit.
Much cheaper: a third or less of the water means a smaller pump, far less chemical use and a heater that brings the pool to temperature in an hour or two. Many owners here keep a plunge pool heated through the shoulder seasons and close it only in deep winter.
The outdoor season in Biloxi runs April through October — about 7 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. The season stretches April through October, and the Gulf Coast pushes longer. Heat plus humidity means algae never sleeps in summer, afternoon storms are routine, and winters are mild enough that a full northern-style close is optional in the southern half of the state.
Jordan Construction, Inc. has the highest customer rating on this Biloxi list at 5 stars across 40 reviews. Bay Pool Company has the largest review count (49 reviews at 4.4 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
In most cities yes — any pool more than 18 to 24 inches deep needs a permit, electrical inspection and a barrier, regardless of footprint. Setbacks from property lines and the house decide where a small pool can go. Mississippi licenses residential builders at the state level for larger projects — verify the license and insurance before you sign. Pool permitting and barrier/fence rules are handled by city and county offices, and coastal counties add wind and flood-zone considerations your builder should already know cold.
A fiberglass or precast plunge pool is often swimmable one to three weeks after excavation; a custom gunite plunge takes six to ten weeks because the shell has to cure before the finish. Permits add time up front, and the deck follows the pool.
Check plunge pool builders in cities near Biloxi, or open the Mississippi directory for every listed market in the state.
Claim your free PoolPad listing, check plunge and small pools among the pool types you build, and show Biloxi homeowners with a small yard what fits.
