New Mexico · Pool Remodeling & Resurfacing · Updated 2026
Compare 20 pool remodeling companies serving Albuquerque for replastering, pebble and quartz finishes, waterline tile, coping, decking and equipment upgrades — with 2026 local price ranges and the questions to ask before you drain the pool.
Ordered by customer rating and review count across the Albuquerque area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Albuquerque pool builders directory ranks all 33 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Albuquerque typically runs $5,000–$9,500, while pebble and quartz finishes run $7,500–$17,000. Everything else stacks on top of that:
| Job | Typical Albuquerque price |
|---|---|
| Replaster (white plaster) | $5,000–$9,500 |
| Pebble or quartz finish | $7,500–$17,000 |
| Waterline tile | $2,400–$7,600 |
| Coping replacement | $2,900–$8,600 |
| Deck resurfacing | $4,000–$11,500 |
| Equipment upgrade (pump, filter, heater, automation) | $3,000–$9,500 |
| Add an attached spa | $14,500–$33,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $14,500–$57,000+ |
New Mexico pricing is close to the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
5 stars from 6 reviews
View Company →Albuquerque market
3.6 average customer rating · 402 reviews · 20 companies · 3 specialists
See All on the Map →20 pool remodeling companies serving Albuquerque. 3 are listed as specialists for this work; the rest are pool builders that routinely handle it. The ranked companies average 3.6 stars across 402 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Expect caliche and cemented desert soils in the dig, and factor wind exposure into cover and equipment planning. Altitude matters in equipment sizing — heaters especially need correct high-elevation specs — and drainage design around monsoon bursts protects decks and equipment pads. Southwestern builds skew clean and geometric: stucco-walled backyards, bright plaster or pebble interiors, and shade structures that make 95° afternoons usable. Smaller pools and spools fit both the lots and the shorter season.
For statewide rankings, city counts and New Mexico prices, see the New Mexico pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where New Mexico requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. New Mexico licenses contractors through the state (look for an active license you can verify with the Regulation & Licensing Department), and municipalities handle pool permits and barrier enforcement locally. Fencing with self-latching gates is the norm; confirm your city's specifics before the design is final.
A standard white plaster replaster in Albuquerque, NM typically runs $5,000–$9,500; quartz and pebble finishes run $7,500–$17,000. Waterline tile adds $2,400–$7,600 and new coping $2,900–$8,600. A full remodel that also updates the deck and equipment runs $14,500–$57,000+. New Mexico pricing is close to the national baseline used for these estimates; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Albuquerque runs May through September — about 5 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. High-desert sun is the story: intense UV at 5,000+ feet burns through chlorine and fades interiors faster than sea-level owners expect. Albuquerque swims May through September; southern New Mexico stretches longer, while Santa Fe's altitude keeps the season short and nights cool.
Enchantment pools and spa renovations llc has the highest customer rating on this Albuquerque list at 5 stars across 6 reviews. Bluewater Pools has the largest review count (153 reviews at 4 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
New Mexico licenses contractors through the state (look for an active license you can verify with the Regulation & Licensing Department), and municipalities handle pool permits and barrier enforcement locally. Fencing with self-latching gates is the norm; confirm your city's specifics before the design is final.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Albuquerque, or open the New Mexico directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Albuquerque homeowners planning a renovation what you do.
