Kentucky · Pool Remodeling & Resurfacing · Updated 2026
Resurfacing, tile and coping, or a complete makeover: 9 pool remodeling companies serving Bowling Green. Ratings, review counts, contact details and 2026 planning prices are below.
Ordered by customer rating and review count across the Bowling Green area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Bowling Green pool builders directory ranks all 22 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Bowling Green typically runs $5,000–$9,500, while pebble and quartz finishes run $7,500–$17,000. Everything else stacks on top of that:
| Job | Typical Bowling Green price |
|---|---|
| Replaster (white plaster) | $5,000–$9,500 |
| Pebble or quartz finish | $7,500–$17,000 |
| Waterline tile | $2,400–$7,600 |
| Coping replacement | $2,900–$8,600 |
| Deck resurfacing | $4,000–$11,500 |
| Equipment upgrade (pump, filter, heater, automation) | $3,000–$9,500 |
| Add an attached spa | $14,500–$33,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $14,500–$57,000+ |
Kentucky pricing is close to the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Bowling Green market
4.4 average customer rating · 913 reviews · 9 companies
See All on the Map →9 pool remodeling companies serving Bowling Green. The ranked companies average 4.4 stars across 913 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Central Kentucky sits on limestone karst — rock excavation surcharges are routine around Lexington, so insist on per-yard rock language. Louisville digs friendlier river soils, while hillside Ohio River lots add slope work. Clay content statewide makes backfill and deck sub-base quality the tell of a careful builder. Vinyl liner is the Kentucky workhorse, gunite leads the country-club end of Louisville and Lexington, and fiberglass keeps growing. Tanning ledges and covered outdoor living have fully arrived here.
For statewide rankings, city counts and Kentucky prices, see the Kentucky pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Kentucky requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Kentucky handles most residential licensing and permitting locally. Confirm insurance certificates, make sure a licensed electrician pulls the equipment permit, and check city or county barrier requirements. Builders with recent county projects can provide more useful approval timelines.
A standard white plaster replaster in Bowling Green, KY typically runs $5,000–$9,500; quartz and pebble finishes run $7,500–$17,000. Waterline tile adds $2,400–$7,600 and new coping $2,900–$8,600. A full remodel that also updates the deck and equipment runs $14,500–$57,000+. Kentucky pricing is close to the national baseline used for these estimates; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Bowling Green runs May through September — about 5 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. May through September, humid through the middle, with enough spring rain to make drainage planning matter. Winters freeze reliably; pools close in October and open in April.
Burton's Quality Pool Services has the highest customer rating on this Bowling Green list at 5 stars across 2 reviews. Pool & Spa Depot has the largest review count (682 reviews at 4.5 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Kentucky handles most residential licensing and permitting locally. Confirm insurance certificates, make sure a licensed electrician pulls the equipment permit, and check city or county barrier requirements. Builders with recent county projects can provide more useful approval timelines.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Bowling Green, or open the Kentucky directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Bowling Green homeowners planning a renovation what you do.
