Tennessee · Pool Remodeling & Resurfacing · Updated 2026
119 pool remodeling companies across Tennessee, ordered by customer rating and review count, with 2026 resurfacing and remodel price ranges so you can compare a replaster against a full renovation. 3 are listed as specialists for this work; the rest are pool builders that routinely handle it. City lists cover 14 Tennessee markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Resurfacing is the anchor job: a standard white plaster replaster in Tennessee typically runs $5,000–$9,500, while pebble and quartz finishes run $7,500–$17,000. Everything else stacks on top of that:
| Job | Typical Tennessee price |
|---|---|
| Replaster (white plaster) | $5,000–$9,500 |
| Pebble or quartz finish | $7,500–$17,000 |
| Waterline tile | $2,400–$7,600 |
| Coping replacement | $2,900–$8,600 |
| Deck resurfacing | $4,000–$11,500 |
| Equipment upgrade (pump, filter, heater, automation) | $3,000–$9,500 |
| Add an attached spa | $14,500–$33,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $14,500–$57,000+ |
Tennessee pricing is close to the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
PoolPad tracks 119 pool remodeling companies across Tennessee, with city lists for 14 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Middle Tennessee sits on limestone karst — rock excavation surcharges are common around Nashville, so get the rock clause in writing per yard. West Tennessee digs easier river-bottom soils, while East Tennessee adds slope and rock both. Drainage on clay-heavy lots separates clean builds from soggy decks. Gunite with sun shelves and spas leads new Nashville-area builds; vinyl liner remains the value king statewide, and fiberglass is growing fast for its quick spring installs. Covered outdoor living — fireplaces, kitchens — pairs with pools more here than almost anywhere.
The largest listed markets are Brentwood (32 companies), Franklin (31 companies), Bartlett (28 companies).
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Tennessee requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Tennessee requires a state contractor license for larger residential projects — most full pool builds qualify, so verify the license and its monetary limit along with insurance. Local codes govern pool permits and barrier fencing, and Nashville-area HOAs frequently add architectural review.
A standard white plaster replaster in Tennessee, TN typically runs $5,000–$9,500; quartz and pebble finishes run $7,500–$17,000. Waterline tile adds $2,400–$7,600 and new coping $2,900–$8,600. A full remodel that also updates the deck and equipment runs $14,500–$57,000+. Tennessee pricing is close to the national baseline used for these estimates; get itemized bids from at least three companies for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Tennessee runs May through September — about 5 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. Tennessee swims May through September, with humid 90° summers and high algae pressure. Colder weather sends most pools into a full or partial close by early November, and spring storms add debris cleanup to the opening schedule.
AR Pools, Stoneworks & Outdoor Living, Inc. has the highest customer rating on this Tennessee list at 5 stars across 215 reviews. Kowboy Pool Company has the largest review count (922 reviews at 4.8 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Tennessee requires a state contractor license for larger residential projects — most full pool builds qualify, so verify the license and its monetary limit along with insurance. Local codes govern pool permits and barrier fencing, and Nashville-area HOAs frequently add architectural review.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check the services you offer, and show Tennessee homeowners planning a renovation what you do.