Utah · Pool Remodeling & Resurfacing · Updated 2026
Compare 49 pool remodeling companies across Utah for replastering, pebble and quartz finishes, waterline tile, coping, decking and equipment upgrades — with 2026 local price ranges and the questions to ask before you drain the pool. City lists cover 15 Utah markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Resurfacing is the anchor job: a standard white plaster replaster in Utah typically runs $5,500–$11,000, while pebble and quartz finishes run $9,000–$20,000. Everything else stacks on top of that:
| Job | Typical Utah price |
|---|---|
| Replaster (white plaster) | $5,500–$11,000 |
| Pebble or quartz finish | $9,000–$20,000 |
| Waterline tile | $2,800–$8,800 |
| Coping replacement | $3,300–$9,900 |
| Deck resurfacing | $4,500–$13,000 |
| Equipment upgrade (pump, filter, heater, automation) | $3,500–$11,000 |
| Add an attached spa | $16,500–$38,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $16,500–$66,000+ |
Utah pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
PoolPad tracks 49 pool remodeling companies across Utah, with city lists for 15 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Bench lots bring slope, rock, and view engineering into play; valley soils vary from clay to gravel and reward soils-aware builders. Altitude affects heater sizing up north, and St. George builds dig caliche and plan for 110° summers. Gunite with tanning ledges and mountain views leads; fiberglass is growing fast in the suburbs. Automatic covers are near-standard, and St. George builds borrow Arizona's pebble-and-shade playbook.
The largest listed markets are Draper (41 companies), Riverton (41 companies), Sandy (41 companies).
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Utah requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Utah licenses contractors at the state level through DOPL — verify the license classification and insurance. Pool permits and residential-code barrier requirements (fencing, self-latching gates) run through your city, and HOA architectural review is common in newer developments.
A standard white plaster replaster in Utah, UT typically runs $5,500–$11,000; quartz and pebble finishes run $9,000–$20,000. Waterline tile adds $2,800–$8,800 and new coping $3,300–$9,900. A full remodel that also updates the deck and equipment runs $16,500–$66,000+. Utah pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three companies for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Utah runs mid-May through September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. Mid-May through September along the Wasatch Front, with dry heat and cool nights; St. George runs closer to six-plus months of desert season. Northern winters freeze properly — full closes are standard — while the south winters light.
Singing S Pools - Construction, Plastering & Repairs has the highest customer rating on this Utah list at 5 stars across 4 reviews. Deep Blue Pools And Spas has the largest review count (583 reviews at 4.6 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Utah licenses contractors at the state level through DOPL — verify the license classification and insurance. Pool permits and residential-code barrier requirements (fencing, self-latching gates) run through your city, and HOA architectural review is common in newer developments.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check the services you offer, and show Utah homeowners planning a renovation what you do.
