Kansas · Vinyl Liner Pool Builders & Installers · Updated 2026
12 vinyl liner pool builders across Kansas — steel and polymer wall pools with a custom-fit liner — ordered by customer rating and review count, with 2026 installed prices and what a liner replacement costs later. City lists cover 6 Kansas markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
A mid-size vinyl liner pool (about 16×32) installed in Kansas typically runs $43,000–$66,500 with standard equipment and a basic deck. The liner itself is replaced every eight to twelve years at $3,800–$6,700:
| Job | Typical Kansas price |
|---|---|
| Small vinyl liner pool (about 12×24), installed | $33,500–$47,500 |
| Mid-size pool (about 16×32), installed | $43,000–$66,500 |
| Large pool (about 20×40), installed | $62,000–$90,500+ |
| Polymer wall upgrade over steel | $1,900–$4,800 |
| Vinyl-covered steps, benches or sun ledge | $1,900–$5,700 |
| Decking and coping | $5,000–$14,500 |
| Equipment upgrades (heater, salt, automation) | $3,000–$8,500 |
| Safety cover | $1,900–$3,800 |
| Permits and inspections | $400–$2,400 |
| Liner replacement, later (every 8–12 years) | $3,800–$6,700 |
Kansas pricing is close to the national baseline used for these estimates. Rectangles cost less than freeforms, steel walls less than polymer, and a thicker liner (27 or 28 mil) adds a little up front and years to the first replacement.
The second liner is part of the real cost of a vinyl pool — ask every bidder what a replacement will run and how long the first one should last.
PoolPad tracks 12 vinyl liner pool builders across Kansas, with city lists for 6 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Clay soils need careful drainage and compaction, while wind exposure shapes cover, fence, and landscaping choices. Hail risk should influence equipment-pad protection and material choices. Flat lots help keep excavation costs reasonable. Vinyl liner pools dominate freezing climates because the wall system tolerates frost heave better than a rigid finish and the liner is forgiving of winterization.
The largest listed markets are Wichita (9 companies), Shawnee (8 companies), Kansas City (7 companies).
Ask about the wall system, floor material and liner gauge, confirm the liner warranty in writing, and get a price for the first liner replacement now so you know the long-term cost. Compare at least three itemized bids for the same size and shape. Kansas handles contractor licensing at the county and city level (Johnson County's program is the most structured) — verify local licensing, insurance, and the electrician on the equipment permit. Pool permits and residential-code barrier requirements run through your municipality.
A mid-size vinyl liner pool installed in Kansas, KS typically runs $43,000–$66,500; small pools run $33,500–$47,500 and large pools $62,000–$90,500+. Decking adds $5,000–$14,500 and a safety cover $1,900–$3,800. Budget $3,800–$6,700 for a liner replacement every eight to twelve years. Kansas pricing is close to the national baseline used for these estimates.
Eight to twelve years is typical, longer with a thicker liner, balanced water and a cover. Fading, brittleness, wrinkles and leaks at seams or fittings are the signs it is time. Replacement is a one-to-three-day job once the new liner arrives, and the pool is otherwise unchanged.
Usually four to eight weeks after permits: a few days to dig and set the walls, a week or two for plumbing, the floor and the deck, then the liner is installed and the pool filled in a day. Custom liners are made to measure and can take two to four weeks to arrive. Liners install best in warm weather, so spring and summer book first.
The smooth surface uses fewer chemicals than plaster and never needs resurfacing, but the liner itself is the recurring cost — roughly the price of a resurfacing spread over a similar interval. Keep the water balanced, avoid letting the level drop, and use a cover to extend liner life.
The outdoor season in Kansas runs May through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. May through mid-September, hot and increasingly windy through summer. Winters freeze hard, with prairie wind chill — pools close by mid-October and open in April.
Elite Pool Construction has the highest customer rating on this Kansas list at 5 stars across 17 reviews. Swims & Sweeps Inc has the largest review count (76 reviews at 4 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Both perform well. Galvanized steel panels are the lower-cost standard and very strong; polymer (plastic) panels cost more but cannot rust and suit salt systems, coastal air and wet soils. Either way, ask how the panels are braced and how the deck is tied to the walls so the coping does not shift.
Yes — walls are built on site, so the depth profile is yours to choose, including diving depths. Spas are usually added as a separate fiberglass or gunite unit beside the pool rather than inside the liner structure. Tanning ledges and benches are formed and then covered with the liner.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check vinyl liner among the pool types you build, and show Kansas homeowners what you install.
