Oregon · Pool Remodeling & Resurfacing · Updated 2026
Resurfacing, tile and coping, or a complete makeover: 28 pool remodeling companies across Oregon. Ratings, review counts, contact details and 2026 planning prices are below. 3 are listed as specialists for this work; the rest are pool builders that routinely handle it. City lists cover 5 Oregon markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Resurfacing is the anchor job: a standard white plaster replaster in Oregon typically runs $6,000–$11,500, while pebble and quartz finishes run $9,000–$20,500. Everything else stacks on top of that:
| Job | Typical Oregon price |
|---|---|
| Replaster (white plaster) | $6,000–$11,500 |
| Pebble or quartz finish | $9,000–$20,500 |
| Waterline tile | $2,900–$9,200 |
| Coping replacement | $3,400–$10,400 |
| Deck resurfacing | $4,500–$14,000 |
| Equipment upgrade (pump, filter, heater, automation) | $3,500–$11,500 |
| Add an attached spa | $17,500–$40,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $17,500–$69,000+ |
Oregon pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
PoolPad tracks 28 pool remodeling companies across Oregon, with city lists for 5 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Westside builds plan around rain — drainage, mud-season access, and slope engineering on view lots — while central Oregon digs volcanic soils with rock surprises worth written clauses. Frost-depth plumbing is standard statewide. Fiberglass leads the growth market, vinyl holds value share, and gunite serves view lots in the hills. Heat pumps, automatic covers, and hot-tub integration are the default kit.
The largest listed markets are Hillsboro (26 companies), Lake Oswego (26 companies), Portland (26 companies).
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Oregon requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Oregon licenses contractors through the CCB — verify the license, bond, and insurance online before signing. Pool permits and residential-code barrier requirements run through your city or county building department, and Portland-metro jurisdictions each keep their own rhythm; ask for recent local timelines.
A standard white plaster replaster in Oregon, OR typically runs $6,000–$11,500; quartz and pebble finishes run $9,000–$20,500. Waterline tile adds $2,900–$9,200 and new coping $3,400–$10,400. A full remodel that also updates the deck and equipment runs $17,500–$69,000+. Oregon pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three companies for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Oregon runs mid-June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. The Willamette Valley swims mid-June through early September unassisted, with heat pumps stretching it meaningfully; Bend adds high-desert sun with cold nights, and Medford runs the state's hottest summers. Winters everywhere call for a full close.
Zacarias Remodeling Construction Inc has the highest customer rating on this Oregon list at 5 stars across 37 reviews. Premier Pools & Spas has the largest review count (80 reviews at 4.1 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Oregon licenses contractors through the CCB — verify the license, bond, and insurance online before signing. Pool permits and residential-code barrier requirements run through your city or county building department, and Portland-metro jurisdictions each keep their own rhythm; ask for recent local timelines.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check the services you offer, and show Oregon homeowners planning a renovation what you do.
