Massachusetts · Pool Remodeling & Resurfacing · Updated 2026
Resurfacing, tile and coping, or a complete makeover: 50 pool remodeling companies in the Revere area. Ratings, review counts, contact details and 2026 planning prices are below. 6 are listed as specialists for this work; the rest are pool builders that routinely handle it. This page shows the top 20.
Ordered by customer rating and review count across the Revere area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Resurfacing is the anchor job: a standard white plaster replaster in Revere typically runs $6,500–$12,500, while pebble and quartz finishes run $10,000–$22,500. Everything else stacks on top of that:
| Job | Typical Revere price |
|---|---|
| Replaster (white plaster) | $6,500–$12,500 |
| Pebble or quartz finish | $10,000–$22,500 |
| Waterline tile | $3,100–$10,000 |
| Coping replacement | $3,800–$11,300 |
| Deck resurfacing | $5,000–$15,000 |
| Equipment upgrade (pump, filter, heater, automation) | $4,000–$12,500 |
| Add an attached spa | $19,000–$44,000 |
| Full remodel (finish, tile, coping, deck, equipment) | $19,000–$75,000+ |
Massachusetts pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Revere market
4.6 average customer rating · 1644 reviews · 50 companies · 6 specialists
See All on the Map →50 pool remodeling companies in the Revere area. 6 are listed as specialists for this work; the rest are pool builders that routinely handle it. The ranked companies average 4.6 stars across 1,644 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
New England geology bites here: glacial till, boulders, and ledge make excavation the wildcard line item, so get rock language in writing. Frost-depth plumbing and freeze-thaw concrete are standard, wetlands setbacks are common in the suburbs, and tight colonial-era lots put a premium on access planning. Gunite leads the western suburbs and the Cape's high end; vinyl liner carries the value market. Automatic covers, heat pumps, and salt systems are mainstream, and fiberglass keeps growing for its fast install inside a short build season.
For statewide rankings, city counts and Massachusetts prices, see the Massachusetts pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Massachusetts requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Massachusetts licenses Construction Supervisors and registers Home Improvement Contractors — verify both where they apply, plus insurance. Pool permits run through your town with strictly enforced barrier requirements (fencing, self-latching gates, alarms where applicable), and inspectors here genuinely check. Wetlands commissions add review on plenty of lots.
A standard white plaster replaster in Revere, MA typically runs $6,500–$12,500; quartz and pebble finishes run $10,000–$22,500. Waterline tile adds $3,100–$10,000 and new coping $3,800–$11,300. A full remodel that also updates the deck and equipment runs $19,000–$75,000+. Massachusetts pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Revere runs June through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. June to mid-September is the typical unheated window, and heaters are common. Winters are long, snowy, and freezing, so a thorough close and snow-rated safety cover are baseline equipment.
AEM Pool Renovations has the highest customer rating on this Revere list at 5 stars across 1 reviews. Ambassador Pools has the largest review count (321 reviews at 4.9 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Massachusetts licenses Construction Supervisors and registers Home Improvement Contractors — verify both where they apply, plus insurance. Pool permits run through your town with strictly enforced barrier requirements (fencing, self-latching gates, alarms where applicable), and inspectors here genuinely check. Wetlands commissions add review on plenty of lots.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Revere, or open the Massachusetts directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Revere homeowners planning a renovation what you do.
