New York · Pool Remodeling & Resurfacing · Updated 2026
Compare 14 pool remodeling companies serving Rochester for replastering, pebble and quartz finishes, waterline tile, coping, decking and equipment upgrades — with 2026 local price ranges and the questions to ask before you drain the pool.
Ordered by customer rating and review count across the Rochester area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Resurfacing is the anchor job: a standard white plaster replaster in Rochester typically runs $6,500–$13,000, while pebble and quartz finishes run $10,500–$23,500. Everything else stacks on top of that:
| Job | Typical Rochester price |
|---|---|
| Replaster (white plaster) | $6,500–$13,000 |
| Pebble or quartz finish | $10,500–$23,500 |
| Waterline tile | $3,300–$10,400 |
| Coping replacement | $3,900–$11,700 |
| Deck resurfacing | $5,000–$15,500 |
| Equipment upgrade (pump, filter, heater, automation) | $4,000–$13,000 |
| Add an attached spa | $19,500–$45,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $19,500–$78,000+ |
New York pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Rochester market
4.3 average customer rating · 1085 reviews · 14 companies
See All on the Map →14 pool remodeling companies serving Rochester. The ranked companies average 4.3 stars across 1,085 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Frost depth drives construction: plumbing runs deep, shells and decks are engineered for freeze-thaw, and the fall close protects it all. Long Island digs sand (easy) while upstate and the lower Hudson Valley hit rock ledge and glacial till — blasting or hammering shows up in bids. Tight suburban lots make access planning part of the price. Vinyl liner rules on value across upstate and much of Long Island; gunite owns the high end from Westchester to the East End. Automatic safety covers are widespread, salt systems keep growing, and compact heated plunge pools are the new city-adjacent trend.
For statewide rankings, city counts and New York prices, see the New York pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where New York requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. New York has no single statewide contractor license — licensing runs by county and city (Nassau, Suffolk, Westchester, and NYC all license home improvement contractors), so verify locally. Statewide, new pools must meet the residential code's barrier requirements and include a pool alarm; towns layer their own fence and setback rules on top.
A standard white plaster replaster in Rochester, NY typically runs $6,500–$13,000; quartz and pebble finishes run $10,500–$23,500. Waterline tile adds $3,300–$10,400 and new coping $3,900–$11,700. A full remodel that also updates the deck and equipment runs $19,500–$78,000+. New York pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Rochester runs Memorial Day through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. The realistic unheated season is Memorial Day to mid-September — heaters are less a luxury than the price of using what you built. Winters are long and freezing, so a professional close is standard everywhere in the state.
Great Escape Pool and Spa has the highest customer rating on this Rochester list at 5 stars across 2 reviews. Pettis Pools & Patio has the largest review count (511 reviews at 4.7 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
New York has no single statewide contractor license — licensing runs by county and city (Nassau, Suffolk, Westchester, and NYC all license home improvement contractors), so verify locally. Statewide, new pools must meet the residential code's barrier requirements and include a pool alarm; towns layer their own fence and setback rules on top.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Rochester, or open the New York directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Rochester homeowners planning a renovation what you do.
