Wisconsin · Pool Remodeling & Resurfacing · Updated 2026
41 pool remodeling companies across Wisconsin, ordered by customer rating and review count, with 2026 resurfacing and remodel price ranges so you can compare a replaster against a full renovation. 3 are listed as specialists for this work; the rest are pool builders that routinely handle it. City lists cover 9 Wisconsin markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Resurfacing is the anchor job: a standard white plaster replaster in Wisconsin typically runs $5,500–$10,500, while pebble and quartz finishes run $8,500–$19,000. Everything else stacks on top of that:
| Job | Typical Wisconsin price |
|---|---|
| Replaster (white plaster) | $5,500–$10,500 |
| Pebble or quartz finish | $8,500–$19,000 |
| Waterline tile | $2,600–$8,400 |
| Coping replacement | $3,200–$9,500 |
| Deck resurfacing | $4,000–$12,500 |
| Equipment upgrade (pump, filter, heater, automation) | $3,000–$10,500 |
| Add an attached spa | $16,000–$37,000 |
| Full remodel (finish, tile, coping, deck, equipment) | $16,000–$63,000+ |
Wisconsin pricing is close to the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
PoolPad tracks 41 pool remodeling companies across Wisconsin, with city lists for 9 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Glacial soils vary from sand to clay with the occasional boulder surprise, and frost depths here drive deep plumbing runs and robust winterization design. The build season itself is short — good builders sequence permits over winter to dig at first thaw. Fiberglass and vinyl liner split the volume; heated pools with automatic covers are the norm because the season demands it. Simple durable designs with patio-forward layouts fit the supper-club entertaining style.
The largest listed markets are Brookfield (18 companies), Greenfield (18 companies), Milwaukee (18 companies).
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Wisconsin requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Wisconsin certifies dwelling contractors at the state level — verify the credential and insurance certificates. Pool permits and residential-code barrier requirements run through your municipality, and lake-adjacent lots can add shoreland zoning review; ask early.
A standard white plaster replaster in Wisconsin, WI typically runs $5,500–$10,500; quartz and pebble finishes run $8,500–$19,000. Waterline tile adds $2,600–$8,400 and new coping $3,200–$9,500. A full remodel that also updates the deck and equipment runs $16,000–$63,000+. Wisconsin pricing is close to the national baseline used for these estimates; get itemized bids from at least three companies for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Wisconsin runs June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. The unheated season runs June through early September, with heaters extending both ends. Winters are long and cold; deep frost makes a detailed close the standard of care.
A O Handy Inc Masonry Restoration Chimney & Tuckpointing Repair has the highest customer rating on this Wisconsin list at 4.9 stars across 117 reviews. Swimming Pool Services has the largest review count (477 reviews at 4.9 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Wisconsin certifies dwelling contractors at the state level — verify the credential and insurance certificates. Pool permits and residential-code barrier requirements run through your municipality, and lake-adjacent lots can add shoreland zoning review; ask early.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check the services you offer, and show Wisconsin homeowners planning a renovation what you do.
