Oklahoma · Inground Pool Builders & Contractors · Updated 2026
Planning a permanent backyard pool? 41 inground pool builders across Oklahoma, ranked by rating and review count, with what a fiberglass, gunite or vinyl liner pool costs installed in Oklahoma this year. City lists cover 7 Oklahoma markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
From new pools and pool remodels to weekly pool cleaning and service, commercial pools, and a fully stocked store, Spartan is here for the life of your pool,...
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Installed prices in Oklahoma run from $40,500–$63,000 for a mid-size vinyl liner pool to $67,500–$108,000 for a comparable gunite pool, with fiberglass in between at $52,000–$76,500. Decking, fencing and permits stack on top:
| Job | Typical Oklahoma price |
|---|---|
| Vinyl liner pool, installed (about 16×32) | $40,500–$63,000 |
| Fiberglass pool, installed (about 14×30) | $52,000–$76,500 |
| Gunite / concrete pool, installed (about 16×32) | $67,500–$108,000 |
| Attached spa or spillover | $11,000–$31,500 |
| Decking and coping around the pool | $5,500–$18,000 |
| Safety fence and gates | $1,800–$5,400 |
| Permits, engineering, utility locates | $500–$3,200 |
| Typical all-in project with deck and fence | $63,000–$135,000+ |
| Ongoing upkeep (chemicals, power, service) | $1,100–$2,900 / year |
Oklahoma pricing is below the national baseline used for these estimates. Soil, access for excavation equipment, slope, utility relocation and the finish and feature package move a quote more than the pool's footprint does — compare itemized bids for the same size and type.
Fiberglass, gunite and vinyl bids are not comparable to each other — settle the type (or ask each builder to bid two), then compare like for like.
PoolPad tracks 41 inground pool builders across Oklahoma, with city lists for 7 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Expansive red clay is the defining dig across much of the state: shells want conservative steel and good drainage, and decks want proper sub-base prep to ride the shrink-swell. Wind exposure shapes cover, fence, and landscaping choices more than most states. Gunite with tanning ledges and storm-tough covers leads the metros; vinyl liner holds a strong value share and fiberglass keeps growing. Outdoor kitchens and covered patios pair naturally with the entertaining season.
The largest listed markets are Oklahoma City (30 companies), Midwest City (28 companies), Moore (28 companies).
Get at least three itemized bids for the same type and size, visit finished pools that are a few years old, and read the warranty for the shell, the finish and the equipment separately. Ask how the company handles rock, groundwater and access problems once digging starts. Oklahoma handles most pool permitting at the city level — OKC, Tulsa, and their suburbs each enforce their own permit and barrier/fence requirements, generally following the residential codes. Verify your builder's insurance certificates and confirm a licensed electrician handles the equipment hookup and bonding.
Installed in Oklahoma, OK, a mid-size vinyl liner pool typically runs $40,500–$63,000, a fiberglass pool $52,000–$76,500 and a gunite pool $67,500–$108,000. With decking, a fence and permits most complete projects land at $63,000–$135,000+. Oklahoma pricing is below the national baseline used for these estimates; the size, finish, features and site conditions move the number most.
There is no single best type. Fiberglass installs fastest and is the easiest to maintain but comes in fixed shapes; gunite can be any shape with any feature but costs more to build and to resurface later; vinyl liner has the lowest upfront price but needs a new liner every eight to twelve years. Match the type to your budget, your yard, how long you plan to stay and how much maintenance you want.
A fiberglass pool is often swimmable two to six weeks after excavation; a vinyl liner pool four to eight weeks; a gunite pool eight to sixteen weeks because the shell has to cure before tile, coping and the finish go on. Permitting adds two to eight weeks up front, and decking and landscaping follow the pool. Most crews dig in the off-season so the pool is ready when the season opens.
Most residential pools are 3 to 6 feet with a deep end of 6 to 8 feet; diving depths of 8 feet or more need a longer pool and a larger excavation. Fiberglass shells are limited to the manufacturer's molds (commonly 6 to 8 feet), while gunite and vinyl liner pools can be built to almost any profile, including sport pools that are shallow at both ends.
The outdoor season in Oklahoma runs May through September — about 6 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. The season runs May through September with hot, windy summers that increase evaporation. Spring storms bring wind and hail, and winter temperatures lead most owners to use at least a partial close.
PMH Pools Tulsa has the highest customer rating on this Oklahoma list at 5 stars across 510 reviews. Spartan Pool & Patio has the largest review count (804 reviews at 4.9 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Oklahoma handles most pool permitting at the city level — OKC, Tulsa, and their suburbs each enforce their own permit and barrier/fence requirements, generally following the residential codes. Verify your builder's insurance certificates and confirm a licensed electrician handles the equipment hookup and bonding.
Budget $1,100–$2,900 / year for chemicals, electricity and routine service, more for a heated pool or a weekly cleaning route. Fiberglass and vinyl surfaces use fewer chemicals than plaster; a variable-speed pump and an automatic cover cut running costs the most.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check the pool types you build, and show Oklahoma homeowners planning a new pool what you install.
