Mississippi · Pool Leak Detection & Repair · Updated 2026
Compare 12 pool leak detection companies across Mississippi for finding and fixing pool leaks. Ratings, review counts, contact details and 2026 planning prices are below. 1 is listed as a specialist for this work; the rest are pool repair companies that routinely handle it. City lists cover 5 Mississippi markets.
Every pool service company in Mississippi: see the full directory →
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
A full leak detection in Mississippi — pressure testing every line, dye testing the shell and listening for underground breaks — typically runs $225–$475, with the repair priced separately:
| Job | Typical Mississippi price |
|---|---|
| Full leak detection (pressure + dye + electronic) | $225–$475 |
| Pressure test only | $150–$275 |
| Skimmer or return fitting repair | $300–$1,100 |
| Light niche / conduit seal | $225–$825 |
| Vinyl liner patch | $100–$275 |
| Structural crack repair (staples, epoxy) | $500–$2,300 |
| Underground plumbing repair | $500–$2,800 |
Mississippi labor rates are below the national baseline used for these estimates. Most leaks turn out to be at fittings, the skimmer throat, the light niche or the equipment pad — cheap fixes once found. Underground line breaks that need the deck cut cost the most, so ask how the company pinpoints them before digging.
A 24-hour bucket test tells you whether the loss is evaporation and whether it happens with the pump on or off — the two facts that shape the detection visit.
PoolPad tracks 12 pool leak detection companies across Mississippi, with city lists for 5 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Yazoo clay around Jackson is genuinely expansive — shells there need conservative engineering and great drainage, and a local builder will talk about it unprompted (treat that as a good sign). The coast brings sand and water-table management; hurricane-zone equipment anchoring matters south of I-10. Soil movement, tree roots and old fittings are the usual culprits; a leak that appears after a drought or a wet season often traces to the ground shifting around the plumbing.
The largest listed markets are Southaven (13 companies), Biloxi (5 companies), Gulfport (5 companies).
Run a bucket test for 24 hours with the pump on, then off, and note the difference — losing water only with the pump running points to the pressure side, only with it off to the suction side or shell. Check the pad for wet ground and the backwash line. That information lets the company quote the right test and often shortens the visit.
A full leak detection in Mississippi, MS — pressure testing the lines, dye testing the shell and electronic listening — typically runs $225–$475, with a pressure test alone at $150–$275. Repairs are priced separately: a skimmer or return fitting $300–$1,100, a light niche seal $225–$825, a structural crack $500–$2,300, and an underground plumbing repair $500–$2,800 depending on how much deck has to be opened. Mississippi labor is below the national baseline used for these estimates.
Do a bucket test: set a bucket of pool water on a step, mark both water levels, and compare after 24 hours with the pump running, then repeat with it off. Evaporation drops both marks equally; a leak drops the pool more. Summer evaporation runs roughly a quarter inch a day, more with wind, heat and a spa spillover. Losing an inch or more a day, wet spots around the deck or pad, or air in the pump basket point to a leak.
Usually. Fittings, skimmer throats, light niches, small plaster cracks and vinyl patches are repaired underwater with epoxy, putty or patch kits. Underground plumbing is repaired by cutting a small section of deck, or by relining or rerouting the line. Draining is reserved for large structural cracks or a full resurfacing.
Evaporation alone typically costs an inch or two a week in Mississippi during April through October, more in hot, dry or windy weather and when a heater or spa spillover is running. Splash-out and backwashing add to it. If you are topping off more than a couple of inches a week, or the autofill runs constantly, get a detection visit — a small leak wastes thousands of gallons and the chemicals in them.
The outdoor season in Mississippi runs April through October — about 7 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. The season stretches April through October, and the Gulf Coast pushes longer. Heat plus humidity means algae never sleeps in summer, afternoon storms are routine, and winters are mild enough that a full northern-style close is optional in the southern half of the state.
Latitude 30 pool restoration has the highest customer rating on this Mississippi list at 5 stars across 9 reviews. Duvall Pool and Leak Detection has the largest review count (180 reviews at 4.7 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Rarely for the leak itself: wear, tear and gradual damage are excluded from most policies. Sudden events — a pipe burst by a freeze, or damage caused by a covered peril — may be covered along with resulting damage to the deck or house. Keep the detection report and photos; some policies reimburse the detection fee when the resulting repair is covered.
A full detection visit usually takes two to four hours: pressure testing each line, dye testing the shell, listening for underground breaks and, if needed, a diver. Simple repairs at fittings are often done the same day; underground plumbing repairs that require cutting and patching the deck take one to three days including concrete cure.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check leak detection among your services, and show Mississippi pool owners losing water that you can find the problem.