Oklahoma · Pool Remodeling & Resurfacing · Updated 2026
Compare 28 pool remodeling companies in the Midwest City area for replastering, pebble and quartz finishes, waterline tile, coping, decking and equipment upgrades — with 2026 local price ranges and the questions to ask before you drain the pool. This page shows the top 20.
Ordered by customer rating and review count across the Midwest City area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
From new pools and pool remodels to weekly pool cleaning and service, commercial pools, and a fully stocked store, Spartan is here for the life of your pool,...
Planning a new pool as well? The Midwest City pool builders directory ranks all 43 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Midwest City typically runs $4,500–$9,000, while pebble and quartz finishes run $7,000–$16,000. Everything else stacks on top of that:
| Job | Typical Midwest City price |
|---|---|
| Replaster (white plaster) | $4,500–$9,000 |
| Pebble or quartz finish | $7,000–$16,000 |
| Waterline tile | $2,300–$7,200 |
| Coping replacement | $2,700–$8,100 |
| Deck resurfacing | $3,500–$11,000 |
| Equipment upgrade (pump, filter, heater, automation) | $2,500–$9,000 |
| Add an attached spa | $13,500–$31,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $13,500–$54,000+ |
Oklahoma pricing is below the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Midwest City market
4.7 average customer rating · 2416 reviews · 28 companies · 1 specialist
See All on the Map →28 pool remodeling companies in the Midwest City area. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it. The ranked companies average 4.7 stars across 2,416 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Expansive red clay is the defining dig across much of the state: shells want conservative steel and good drainage, and decks want proper sub-base prep to ride the shrink-swell. Wind exposure shapes cover, fence, and landscaping choices more than most states. Gunite with tanning ledges and storm-tough covers leads the metros; vinyl liner holds a strong value share and fiberglass keeps growing. Outdoor kitchens and covered patios pair naturally with the entertaining season.
For statewide rankings, city counts and Oklahoma prices, see the Oklahoma pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Oklahoma requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Oklahoma handles most pool permitting at the city level — OKC, Tulsa, and their suburbs each enforce their own permit and barrier/fence requirements, generally following the residential codes. Verify your builder's insurance certificates and confirm a licensed electrician handles the equipment hookup and bonding.
A standard white plaster replaster in Midwest City, OK typically runs $4,500–$9,000; quartz and pebble finishes run $7,000–$16,000. Waterline tile adds $2,300–$7,200 and new coping $2,700–$8,100. A full remodel that also updates the deck and equipment runs $13,500–$54,000+. Oklahoma pricing is below the national baseline used for these estimates; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Midwest City runs May through September — about 6 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. The season runs May through September with hot, windy summers that increase evaporation. Spring storms bring wind and hail, and winter temperatures lead most owners to use at least a partial close.
Pools and Spas by Design has the highest customer rating on this Midwest City list at 5 stars across 41 reviews. Spartan Pool & Patio has the largest review count (798 reviews at 4.9 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Oklahoma handles most pool permitting at the city level — OKC, Tulsa, and their suburbs each enforce their own permit and barrier/fence requirements, generally following the residential codes. Verify your builder's insurance certificates and confirm a licensed electrician handles the equipment hookup and bonding.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Midwest City, or open the Oklahoma directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Midwest City homeowners planning a renovation what you do.
