Illinois · Pool Remodeling & Resurfacing · Updated 2026
Compare 59 pool remodeling companies in the Park Ridge area for replastering, pebble and quartz finishes, waterline tile, coping, decking and equipment upgrades — with 2026 local price ranges and the questions to ask before you drain the pool. This page shows the top 20.
Ordered by customer rating and review count across the Park Ridge area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Park Ridge pool builders directory ranks all 110 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Park Ridge typically runs $5,500–$11,000, while pebble and quartz finishes run $9,000–$20,000. Everything else stacks on top of that:
| Job | Typical Park Ridge price |
|---|---|
| Replaster (white plaster) | $5,500–$11,000 |
| Pebble or quartz finish | $9,000–$20,000 |
| Waterline tile | $2,800–$8,800 |
| Coping replacement | $3,300–$9,900 |
| Deck resurfacing | $4,500–$13,000 |
| Equipment upgrade (pump, filter, heater, automation) | $3,500–$11,000 |
| Add an attached spa | $16,500–$38,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $16,500–$66,000+ |
Illinois pricing is above the national baseline used for these estimates, mainly on labor and permitting. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Park Ridge market
4.7 average customer rating · 2706 reviews · 59 companies · 11 specialists
See All on the Map →59 pool remodeling companies in the Park Ridge area. 11 are listed as specialists for this work; the rest are pool builders that routinely handle it. The ranked companies average 4.7 stars across 2,706 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Heavy clay dominates the region — it holds water and moves with moisture, so drainage design, compacted backfill, and proper deck sub-base separate clean builds from heaved concrete. Frost-depth plumbing is standard, and older-suburb lots put a premium on access planning. Vinyl liner leads on value; gunite owns the North Shore and western estate corridors. Automatic covers are close to standard on new builds, and fiberglass keeps growing for speed inside the short season.
For statewide rankings, city counts and Illinois prices, see the Illinois pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Illinois requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Illinois licenses trades such as plumbing and electrical at the state level while general residential licensing runs through municipalities. Chicagoland suburbs keep different permit schedules, so ask for recent projects in your village. Residential-code barrier requirements are checked at inspection.
A standard white plaster replaster in Park Ridge, IL typically runs $5,500–$11,000; quartz and pebble finishes run $9,000–$20,000. Waterline tile adds $2,800–$8,800 and new coping $3,300–$9,900. A full remodel that also updates the deck and equipment runs $16,500–$66,000+. Illinois pricing is above the national baseline used for these estimates, mainly on labor and permitting; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Park Ridge runs late May through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. Late May through mid-September unheated; heaters are near-universal because owners want their money's worth. Winters are long and hard-freezing, with lake-effect intensity near the shore — the fall close is sacred here.
Berno Renovations has the highest customer rating on this Park Ridge list at 5 stars across 64 reviews. All Seasons Pools & Spas, Inc. has the largest review count (665 reviews at 4.8 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Illinois licenses trades such as plumbing and electrical at the state level while general residential licensing runs through municipalities. Chicagoland suburbs keep different permit schedules, so ask for recent projects in your village. Residential-code barrier requirements are checked at inspection.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Park Ridge, or open the Illinois directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Park Ridge homeowners planning a renovation what you do.
