Minnesota · Above-Ground Pool Installers & Dealers · Updated 2026
A swimming pool this season without a construction project: 2 above-ground pool installers serving Minneapolis, ranked by rating and review count, with what an above-ground pool costs installed in Minneapolis this year.
Ordered by customer rating and review count across the Minneapolis area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Planning a new pool as well? The Minneapolis pool builders directory ranks all 41 builders in the area.
A 24-foot round pool kit runs $2,500–$7,000 and professional installation in Minneapolis adds $1,600–$4,200, so a complete installed pool with pump and filter typically lands between the two kit prices plus labor. Semi-inground pools and decks are the big step up:
| Job | Typical Minneapolis price |
|---|---|
| Round pool kit (about 24 ft), walls, liner, pump & filter | $2,500–$7,000 |
| Oval pool kit (about 15×30) | $4,000–$10,000 |
| Semi-inground pool, installed | $9,000–$22,000 |
| Professional installation (kit assembly, liner, equipment) | $1,600–$4,200 |
| Site prep and leveling | $550–$2,100 |
| Electrical (GFCI circuit, bonding) | $550–$1,600 |
| Deck or platform around the pool | $3,500–$16,500 |
| Equipment upgrades (heater, salt system, robot) | $600–$3,500 |
| Liner replacement, later (every 5–9 years) | $650–$2,100 |
Minnesota labor is above the national baseline used for these estimates, mainly on labor and permitting; pool kits are priced nationally. Wall gauge and resin-versus-steel frames, a sloped yard that needs leveling, and the deck decide most of the spread between quotes.
A pool set within an inch of level lasts; one set on a slope stretches the liner and buckles the wall. Pay for the site prep.
Minneapolis market
4.2 average customer rating · 165 reviews · 2 companies
See All on the Map →2 above-ground pool installers serving Minneapolis. The ranked companies average 4.2 stars across 165 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Above-ground pools are the practical choice across much of Minnesota: the season is June through early September, the pool is winterized each fall, and a resin or heavy-gauge steel wall shrugs off the freeze-thaw that cracks cheap kits.
For statewide rankings, city counts and Minnesota prices, see the Minnesota above-ground pool installers directory, or check the nearby cities below.
Buy from a dealer that installs what it sells or hires a crew that does: a level base, a wrinkle-free liner and a correctly sized pump are what separate a 15-year pool from a two-season one. Check your city's permit and fence rules before the pool is ordered.
A 24-foot round kit runs $2,500–$7,000 and an oval kit $4,000–$10,000; professional installation in Minneapolis, MN adds $1,600–$4,200 plus $550–$2,100 for site prep and $550–$1,600 for the electrical. A semi-inground pool installed runs $9,000–$22,000, and a deck $3,500–$16,500. Minnesota labor is above the national baseline used for these estimates, mainly on labor and permitting.
A quality steel or resin pool lasts 10 to 20 years; the liner is the wear item at five to nine years, and the pump and filter last eight to twelve. Keeping the water balanced, the pool full and the frame away from sprinklers and chemicals stored nearby is what extends it.
Most crews level the site and assemble a round pool in one day, with the liner set and the pool filling by evening; ovals and semi-inground pools take two to three days, and a deck is a separate job afterward. Filling takes 12 to 36 hours depending on size and water pressure.
Many cities require a permit and a barrier for any pool more than 24 inches deep, and nearly all require the electrical to be permitted and bonded. Walls over 48 inches often count as part of the barrier if the ladder is removable or lockable. Minnesota licenses residential building contractors at the state level — verify the license and insurance before signing. Pool permits and residential-code barrier requirements (fences, self-latching gates) run through your city, and Twin Cities suburbs are organized, thorough, and worth asking your builder's recent timelines about.
The outdoor season in Minneapolis runs June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. June through early September unheated; heaters are effectively standard equipment. Winters are among the coldest in pool America, with frost that runs deep — the October close is engineered, not improvised.
Poolwerx Performance Pool & Spa has the highest customer rating on this Minneapolis list at 4.4 stars across 161 reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Only pools built for it — semi-inground models have reinforced walls designed for backfill. Burying a standard above-ground pool voids its warranty and can collapse the wall when it is drained. Semi-inground pools cost more than above-ground kits but far less than a full inground pool.
A handy owner can assemble a round kit on a level site in a weekend, but leveling, liner setting and the electrical are where most DIY pools go wrong. Professional installation is a fraction of the pool's price and most dealers' warranties assume it.
Check above-ground pool installers in cities near Minneapolis, or open the Minnesota directory for every listed market in the state.
Claim your free PoolPad listing, check above-ground among the pool types you install, and show Minneapolis families shopping for a pool this season what you carry.
