Minnesota · Plunge & Small Pool Builders · Updated 2026
Compare 6 plunge pool builders serving Minneapolis for plunge and small-pool construction. Ratings, review counts, contact details and 2026 planning prices are below. 1 is listed as a specialist for this work; the rest are fiberglass pool installers that routinely handle it.
Ordered by customer rating and review count across the Minneapolis area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Companies in the second group install fiberglass pools; most manufacturers offer plunge and cocktail shells — ask which small models they carry and whether they build custom gunite plunges too.
Planning a new pool as well? The Minneapolis pool builders directory ranks all 41 builders in the area.
Installed in Minneapolis, a fiberglass plunge pool typically runs $38,500–$66,000 and a custom gunite plunge or spool $55,000–$99,000 — the small footprint saves on excavation and finish, but the equipment pad costs about the same as a full-size pool:
| Job | Typical Minneapolis price |
|---|---|
| Precast concrete plunge pool, installed | $33,000–$60,500 |
| Fiberglass plunge pool, installed | $38,500–$66,000 |
| Custom gunite plunge pool | $55,000–$99,000 |
| Spool (spa + pool) with jets and heater | $66,000–$121,000 |
| Heater (year-round use) | $3,300–$8,800 |
| Chiller (cold plunge) | $4,400–$9,900 |
| Swim jets or resistance current | $5,500–$13,000 |
| Decking and coping | $4,500–$13,000 |
| Permits and inspections | $600–$3,300 |
Minnesota pricing is above the national baseline used for these estimates, mainly on labor and permitting. A plunge pool is not half the price of a full pool — the pump, filter, heater, electrical and permits are the same — but it fits where nothing else will and costs far less to heat and maintain.
A heater on a 4,000-gallon pool costs little to run — it is the difference between a plunge pool used eight months a year and one used eight weeks.
Minneapolis market
4.5 average customer rating · 426 reviews · 6 companies · 1 specialist
See All on the Map →6 plunge pool builders serving Minneapolis. 1 is listed as a specialist for this work; the rest are fiberglass pool installers that routinely handle it. The ranked companies average 4.5 stars across 426 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Fiberglass and vinyl liner dominate for install speed; automatic covers and heaters are near-universal. Compact heated designs that stretch the season — and integrate hot tubs — are the local signature. Smaller lots and higher construction costs have made plunge pools, cocktail pools and spools the fastest-growing pool type — a heated 8×16 pool costs a fraction to run and fits a courtyard.
For statewide rankings, city counts and Minnesota prices, see the Minnesota plunge pool builders directory, or check the nearby cities below.
Measure the access route first — a crane over the house changes the budget. Decide on heat, jets and a bench up front, since they drive the equipment. Then compare a fiberglass model against a custom gunite price for the same footprint. Minnesota licenses residential building contractors at the state level — verify the license and insurance before signing. Pool permits and residential-code barrier requirements (fences, self-latching gates) run through your city, and Twin Cities suburbs are organized, thorough, and worth asking your builder's recent timelines about.
Installed in Minneapolis, MN, a fiberglass plunge pool typically runs $38,500–$66,000, a precast concrete plunge $33,000–$60,500 and a custom gunite plunge $55,000–$99,000. A spool with jets and a heater runs $66,000–$121,000. Decking adds $4,500–$13,000 and a heater $3,300–$8,800. Minnesota pricing is above the national baseline used for these estimates, mainly on labor and permitting.
Most are 7 to 10 feet wide, 12 to 20 feet long and 4 to 6 feet deep with a flat floor — about 2,000 to 6,000 gallons versus 15,000 to 25,000 for a typical family pool. Cocktail pools add benches and a tanning shelf; spools are often 8×14 to 10×20 with spa jets.
You can cool off, float, soak and exercise in place; laps need a swim-jet or resistance-current system, which many plunge and spool builders install. For actual lap swimming a narrow lap pool of 30 feet or more is the better fit.
Much cheaper: a third or less of the water means a smaller pump, far less chemical use and a heater that brings the pool to temperature in an hour or two. Many owners here keep a plunge pool heated through the shoulder seasons and close it only in deep winter.
The outdoor season in Minneapolis runs June through early September — about 3 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. June through early September unheated; heaters are effectively standard equipment. Winters are among the coldest in pool America, with frost that runs deep — the October close is engineered, not improvised.
Blaiser Pools has the highest customer rating on this Minneapolis list at 4.9 stars across 49 reviews. Poolwerx Performance Pool & Spa has the largest review count (161 reviews at 4.4 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
In most cities yes — any pool more than 18 to 24 inches deep needs a permit, electrical inspection and a barrier, regardless of footprint. Setbacks from property lines and the house decide where a small pool can go. Minnesota licenses residential building contractors at the state level — verify the license and insurance before signing. Pool permits and residential-code barrier requirements (fences, self-latching gates) run through your city, and Twin Cities suburbs are organized, thorough, and worth asking your builder's recent timelines about.
A fiberglass or precast plunge pool is often swimmable one to three weeks after excavation; a custom gunite plunge takes six to ten weeks because the shell has to cure before the finish. Permits add time up front, and the deck follows the pool.
Check plunge pool builders in cities near Minneapolis, or open the Minnesota directory for every listed market in the state.
Claim your free PoolPad listing, check plunge and small pools among the pool types you build, and show Minneapolis homeowners with a small yard what fits.
