North Carolina · Pool Remodeling & Resurfacing · Updated 2026
Compare 34 pool remodeling companies in the Charlotte area for replastering, pebble and quartz finishes, waterline tile, coping, decking and equipment upgrades — with 2026 local price ranges and the questions to ask before you drain the pool. This page shows the top 20.
Ordered by customer rating and review count across the Charlotte area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Planning a new pool as well? The Charlotte pool builders directory ranks all 93 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Charlotte typically runs $5,000–$9,500, while pebble and quartz finishes run $7,500–$17,000. Everything else stacks on top of that:
| Job | Typical Charlotte price |
|---|---|
| Replaster (white plaster) | $5,000–$9,500 |
| Pebble or quartz finish | $7,500–$17,000 |
| Waterline tile | $2,400–$7,600 |
| Coping replacement | $2,900–$8,600 |
| Deck resurfacing | $4,000–$11,500 |
| Equipment upgrade (pump, filter, heater, automation) | $3,000–$9,500 |
| Add an attached spa | $14,500–$33,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $14,500–$57,000+ |
North Carolina pricing is close to the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Charlotte market
4.6 average customer rating · 2191 reviews · 34 companies · 1 specialist
See All on the Map →34 pool remodeling companies in the Charlotte area. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it. The ranked companies average 4.6 stars across 2,191 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Piedmont red clay drains slowly and moves with moisture — drainage and backfill quality separate good builds from callbacks. Coastal builds deal with sandy soil, higher water tables, and salt-air corrosion on equipment, while mountain lots add slope engineering and shorter build windows. Vinyl liner pools with concrete decks are the state's workhorse; gunite with spas and sun shelves leads in Charlotte and Raleigh's upper end. Fiberglass has surged in the last decade — quick installs fit the season, and the smooth shell suits salt systems.
For statewide rankings, city counts and North Carolina prices, see the North Carolina pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where North Carolina requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Larger residential projects in North Carolina require a state-licensed general contractor, and pools route through county/municipal permits with barrier requirements from the state residential code. Verify the license classification and insurance, and on coastal lots ask about wind-zone equipment anchoring and flood-zone rules before the design locks.
A standard white plaster replaster in Charlotte, NC typically runs $5,000–$9,500; quartz and pebble finishes run $7,500–$17,000. Waterline tile adds $2,400–$7,600 and new coping $2,900–$8,600. A full remodel that also updates the deck and equipment runs $14,500–$57,000+. North Carolina pricing is close to the national baseline used for these estimates; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Charlotte runs May through September — about 5 months unheated, with a heater adding several weeks on each end. Winters are mild enough that many owners idle equipment with a partial close instead of a full winterization. The Piedmont swims May through September; the coast adds a few shoulder weeks and the mountains give a few back. Summers are humid with steady afternoon storm activity, and winters are cold enough that most pools get at least a partial close.
Pelican Pools and Design has the highest customer rating on this Charlotte list at 5 stars across 42 reviews. Blue Haven Pools & Spas has the largest review count (517 reviews at 4.9 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Larger residential projects in North Carolina require a state-licensed general contractor, and pools route through county/municipal permits with barrier requirements from the state residential code. Verify the license classification and insurance, and on coastal lots ask about wind-zone equipment anchoring and flood-zone rules before the design locks.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Charlotte, or open the North Carolina directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Charlotte homeowners planning a renovation what you do.
