Indiana · Pool Remodeling & Resurfacing · Updated 2026
Resurfacing, tile and coping, or a complete makeover: 67 pool remodeling companies across Indiana. Ratings, review counts, contact details and 2026 planning prices are below. 1 is listed as a specialist for this work; the rest are pool builders that routinely handle it. City lists cover 7 Indiana markets.
The order uses a weighted mix of customer rating and review count; open a city below for the full local list. Confirm current credentials, availability and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Choose a local list for customer ratings, review counts, 2026 prices and the questions to ask. Cities are sorted by listed company count.
Resurfacing is the anchor job: a standard white plaster replaster in Indiana typically runs $5,000–$10,000, while pebble and quartz finishes run $8,000–$18,000. Everything else stacks on top of that:
| Job | Typical Indiana price |
|---|---|
| Replaster (white plaster) | $5,000–$10,000 |
| Pebble or quartz finish | $8,000–$18,000 |
| Waterline tile | $2,500–$8,000 |
| Coping replacement | $3,000–$9,000 |
| Deck resurfacing | $4,000–$12,000 |
| Equipment upgrade (pump, filter, heater, automation) | $3,000–$10,000 |
| Add an attached spa | $15,000–$35,000 |
| Full remodel (finish, tile, coping, deck, equipment) | $15,000–$60,000+ |
Indiana pricing is close to the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
PoolPad tracks 67 pool remodeling companies across Indiana, with city lists for 7 markets. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Clay soils across most of the state make drainage and compacted backfill the quality separators, and frost-depth plumbing is standard spec. Flat lots keep site work simple by national standards — one reason Indiana installs price competitively. Vinyl liner rules, fiberglass is the fast-growing second, and gunite holds the Carmel-and-Zionsville end of the market. Simple rectangles with tanning ledges and big patios fit the entertaining culture.
The largest listed markets are Greenwood (24 companies), Indianapolis (23 companies), Fishers (22 companies).
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Indiana requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Indiana handles residential contractor licensing locally, so check insurance certificates and references and confirm a licensed electrician pulls the equipment permit. Pool permits and residential-code barrier requirements, including fencing and self-latching gates, run through the county or municipal building department.
A standard white plaster replaster in Indiana, IN typically runs $5,000–$10,000; quartz and pebble finishes run $8,000–$18,000. Waterline tile adds $2,500–$8,000 and new coping $3,000–$9,000. A full remodel that also updates the deck and equipment runs $15,000–$60,000+. Indiana pricing is close to the national baseline used for these estimates; get itemized bids from at least three companies for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Most crews schedule remodels for the shoulder seasons so the pool is ready when the season starts.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The outdoor season in Indiana runs late May through mid-September — about 4 months unheated. A full professional winterization each fall protects plumbing and equipment through the freeze, and spring openings cluster into the same few weeks. Late May through mid-September, hot and humid at the peak. Winters freeze hard; October closings and April openings bookend every year.
HOOSIER POOL COVERS has the highest customer rating on this Indiana list at 5 stars across 168 reviews. Olympia Pools & Spas has the largest review count (391 reviews at 4.7 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Indiana handles residential contractor licensing locally, so check insurance certificates and references and confirm a licensed electrician pulls the equipment permit. Pool permits and residential-code barrier requirements, including fencing and self-latching gates, run through the county or municipal building department.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
If your property is near a state line, check the neighboring directories too.
Claim your free PoolPad listing, check the services you offer, and show Indiana homeowners planning a renovation what you do.
