Arizona · Pool Remodeling & Resurfacing · Updated 2026
Resurfacing, tile and coping, or a complete makeover: 44 pool remodeling companies in the Phoenix area. Ratings, review counts, contact details and 2026 planning prices are below. 3 are listed as specialists for this work; the rest are pool builders that routinely handle it. This page shows the top 20.
Ordered by customer rating and review count across the Phoenix area. Listings include the available rating, contact details and location; confirm current credentials and scope directly.
Most pool builders also take on remodels, replastering and equipment upgrades — confirm the scope and the finish options when you call.
Work with the Best of the Best—Tribal Waters LLC will build you your dream pool. Phoenix's top pool builder, family owned since 2006. We specialize in...
Planning a new pool as well? The Phoenix pool builders directory ranks all 343 builders in the area.
Resurfacing is the anchor job: a standard white plaster replaster in Phoenix typically runs $5,000–$9,500, while pebble and quartz finishes run $7,500–$17,000. Everything else stacks on top of that:
| Job | Typical Phoenix price |
|---|---|
| Replaster (white plaster) | $5,000–$9,500 |
| Pebble or quartz finish | $7,500–$17,000 |
| Waterline tile | $2,400–$7,600 |
| Coping replacement | $2,900–$8,600 |
| Deck resurfacing | $4,000–$11,500 |
| Equipment upgrade (pump, filter, heater, automation) | $3,000–$9,500 |
| Add an attached spa | $14,500–$33,500 |
| Full remodel (finish, tile, coping, deck, equipment) | $14,500–$57,000+ |
Arizona pricing is close to the national baseline used for these estimates. Plaster has a finite life — 10–15 years for white plaster, 15–20+ for pebble — so a resurfacing quote is often the moment to price tile, coping and equipment in the same drain.
Tile, coping, LED lights, a tanning ledge or an attached spa cost far less during a resurfacing than as a separate job later.
Phoenix market
4.6 average customer rating · 5696 reviews · 44 companies · 3 specialists
See All on the Map →44 pool remodeling companies in the Phoenix area. 3 are listed as specialists for this work; the rest are pool builders that routinely handle it. The ranked companies average 4.6 stars across 5,696 customer reviews. PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Two feet down, much of the Valley is caliche — a cemented hardpan that can dull excavator teeth and add excavation cost. Get every bid's rock or caliche clause in writing, priced per yard, before signing. Stable desert soils and limited frost concerns can keep other construction phases moving. Pebble finishes, extended shallow play areas, and planned shade are common — ramadas, sail shades, and north-side placement all matter at 115°. Cool-deck coatings are standard, negative edges suit Scottsdale hillsides, and some projects add misters or pool chillers.
For statewide rankings, city counts and Arizona prices, see the Arizona pool remodeling directory, or check the nearby cities below.
Ask for nearby resurfacing jobs that are several years old, not just fresh ones. Confirm licensing where Arizona requires it, insurance, and who holds the finish warranty. Compare at least three itemized bids against the same scope: finish, tile, coping, deck, equipment and startup. Arizona pool builders carry a state Registrar of Contractors (ROC) license you can verify online in seconds. State law sets pool barrier requirements, and most Valley cities and Pima County enforce stricter local versions — fence heights, self-latching gates, and door alarms are checked at final inspection, and your builder should design for your city's rules from the first drawing.
A standard white plaster replaster in Phoenix, AZ typically runs $5,000–$9,500; quartz and pebble finishes run $7,500–$17,000. Waterline tile adds $2,400–$7,600 and new coping $2,900–$8,600. A full remodel that also updates the deck and equipment runs $14,500–$57,000+. Arizona pricing is close to the national baseline used for these estimates; get itemized bids from at least three of the pool remodeling companies listed here for your pool's size and condition.
White plaster typically lasts 10–15 years; quartz and pebble finishes 15–20 or more with balanced water. Roughing, staining that no longer cleans, exposed aggregate, hollow spots and rust marks from the rebar are the signs the finish is at the end of its life. Etching accelerates when pH and calcium hardness run low, so a consistent water-care routine is the cheapest way to delay the next resurfacing.
A straightforward resurfacing usually keeps the pool down for one to two weeks: drain, prep, finish, cure and fill, followed by a 28-day startup brushing routine. Adding tile, coping and deck work extends that to three to six weeks, and equipment or structural changes can push a full renovation past two months. Contractors here work year-round, but spring books up first.
Resurface if the shell, tile, coping and equipment are sound and you mostly dislike the finish. Remodel when several systems are at the end of their life at once — a drained pool is the cheapest moment to replace tile and coping, add a tanning ledge or spa, move to LED lights, or install a variable-speed pump and automation. Ask each contractor to price the resurfacing alone and the bundled options separately so you can see the marginal cost of each upgrade.
The prime outdoor season in Phoenix runs April through October — roughly 6 months of comfortable unheated swimming — and pools stay open and running year-round rather than being winterized. Pools earn their keep from April to October, with 100°+ heat for a hundred-plus days most years. The dry air means evaporation of a quarter inch a day in summer, intense UV burns off chlorine, and monsoon season (July–September) throws dust, wind, and debris at every pool in the metro.
HK Pools AZ has the highest customer rating on this Phoenix list at 5 stars across 135 reviews. Presidential Pools has the largest review count (909 reviews at 4.3 stars). PoolPad orders the list with a weighted score that combines customer rating and review count, so a long track record counts for more than a handful of scores.
Arizona pool builders carry a state Registrar of Contractors (ROC) license you can verify online in seconds. State law sets pool barrier requirements, and most Valley cities and Pima County enforce stricter local versions — fence heights, self-latching gates, and door alarms are checked at final inspection, and your builder should design for your city's rules from the first drawing.
Plaster and pebble finishes normally carry a manufacturer material warranty (often 5–10 years, sometimes limited or prorated) plus the installer's workmanship warranty (commonly 1–5 years) covering delamination, spot etching from improper startup and bond failure. Tile, coping and equipment carry their own terms. Read what voids coverage — most exclude damage from unbalanced water — and keep your startup and water-test records.
Check pool remodeling in cities near Phoenix, or open the Arizona directory for every listed market in the state.
Claim your free PoolPad listing, check the services you offer, and show Phoenix homeowners planning a renovation what you do.
